You can solve the problem of replacing or installing the outlet on your own, without involving electricians. With some effort, one can easily refute the widespread belief that electrical work can only be done by specialists.
We will tell you how to choose a socket for arranging home wiring or replacing a damaged device. The article submitted for consideration describes in detail how to connect the outlet and prepare the necessary tools. Based on our recommendations, you can easily cope with the installation and connection of wiring products.
Typical outlet types
The reasons for changing the outlet can be very different - from full-scale repairs to ordinary breakdowns. Faced with such a problem, you have to choose the right product in the store or on the market.
Manufacturers offer a variety of models in shape, color, purpose. It is difficult for an inexperienced person to decide so immediately what exactly he needs.
The sockets offered by designers sometimes amaze their imagination with their breathtaking shapes. And the modern materials used to decorate them are very diverse - wood, glass, stone
Sockets, offered by many manufacturing companies, differ not only in appearance, but also in the type of installation. Depending on how the wire is laid, you will need an appropriate outlet.
According to the location relative to the wall on which the installation of electrical points is carried out, there are 2 types of sockets:
- built-in;
- waybills.
Built-in is used for installation in drywall walls, walls made of brick, or concrete. The main distinguishing feature of such outlets is their electrical parts, like the entire wire, are immersed in the wall. To do this, a special gutter, a stroba, is cut through the wall using a punch. It contains wires enclosed in a corrugated pipe.
A special recess is cut under the socket with a diameter corresponding to the diameter of the mounting box. This hole may be slightly larger, but in no case should it be allowed to be smaller. The sockets should not be subjected to deformation during installation.
An outlet for internal wiring is used much more often than patch models. It is safer to use.
Built-in models are in demand among residents of megacities and other settlements. They are popular in homes and apartments with young children. These sockets fit perfectly into the interior, thanks to the rich color palette offered by manufacturers.
Overhead sockets differ from the built-in sockets in their appearance - they are completely outside. Their electrical mechanism is hidden only in a decorative box screwed over the wall. Wires also go over the wall, covered with a special overlay.
An outlet with an overhead type of installation is most often used in the office. It is important that all wires are well insulated and that there are no taps or other sources of water near.
Basically, an overhead outlet is used for installation in houses with wooden walls.
Depending on the internal structure of the working mechanism, sockets are:
- with a screw clamp, when the wire inserted into the socket mechanism is fixed between the plates connected by a screw. In case of flattening of the wire during use, just tighten the screws;
- with spring terminals. Here, the contact hole for the wire is expanded by pressing a special key. Over time, when the mount weakens due to deformation of the wire, it is necessary to remove the flattened part with pliers and reconnect.
From what wiring the socket will be used for, two and three contact ones are allocated. Two-pin - these are sockets without grounding. Their main advantage is lower cost.
In new buildings, wiring is laid corresponding to modern living conditions - using three contact wires
Three-pin - with grounding. They are installed in rooms where it is necessary to use electrical appliances that need grounding - computers, washing machines and others.
It is dangerous to install two contact sockets in rooms with a high level of humidity, near showers and sinks
Before purchasing an outlet, you need to pay attention to its rear wall. It indicates what load and number of phases it is designed for. Most often, the current value corresponds to 16A, and the voltage is 220 volts. However, to connect an electric stove, most often it is necessary to bring a separate line and put a three-phase outlet.
If you need to connect a device with a large load, it is better to supply a three-phase network. Here you need to install a special outlet that can withstand a voltage of 380 volts and a load of up to 32A
The time has passed when there was no special choice of outlets and what was on the shelves of shops was bought. Now manufacturers, competing with each other, in order to attract more customers are developing various types of outlets.
For home use, you can choose the option that is most suitable for a particular room, for example, for arranging an electric point in the bathroom, in the pool or in the combined bathroom, and for installation within the entrance group of a private house.
For bathrooms it is convenient to use special models - with a protective cover. In addition, these sockets are made with a high level of protection against dust and moisture.
Outlets in which openings are closed with special overlays - protective curtains, young parents like to install. This allows you to further protect their growing children who are interested in studying the surrounding objects.
Socket openings that are closed by curtains open depending on the model. Sometimes it’s enough just to insert the plug, in some cases it takes some effort
Outlet models equipped with a current indicator, a timer that can be programmed as needed, or options with a plug ejector are also very attractive.
An interesting solution for children's rooms was invented by designers - a socket with lighting. A child waking up in the middle of the night is not afraid of complete darkness
In the product family for the device of electric points there is a special group - retractable sockets, we recommend that you familiarize yourself with the features of the device and installation.
Construction and components
In order to thoroughly understand how to properly install a new outlet at home, you need to study a little its constituent elements. All outlets are sold pre-assembled. Therefore, when installing it, you will have to unwind everything yourself.
The main components of the outlet are the base, the conductive part, and the decorative front panel. The base is made of ceramic or high quality plastic. All elements are attached to it - conductive parts and a face plate.
Ceramic substrates are considered more reliable, but they require particularly careful installation, because in case of damage you will have to buy a new outlet.
The decorative overlay is designed to hide all the working elements. It serves as a reliable insulator of the working part from external influences. Some models provide the ability to easily replace this part of the outlet.
Familiarity with the internal structure of the outlet will help to better understand the process of its proper connection.
The working part of the outlet consists of spring contacts and terminals to which electrical wires are connected. One of the important contacts is grounding.
Conductive elements are made of brass or bronze. The latter are better, but are extremely rare. Therefore, you should choose options from tinned brass - they are more reliable than ordinary brass, they are better soldered and last longer.
Designer sockets allow you to make the interior of your home unforgettable. Their unusual performance brings a twist.
Standard installation steps
In order for the outlet to work for a long time and not create any problems, you need to carefully consider its installation. It is important to do everything correctly and consistently, without rushing. Only in this case can a good result be guaranteed.
Image Gallery
Photo from
Disassembling the outlet before installation
External panel and socket mechanism
Preparing the cable for connection
Preparing the wires for connection
Power input to screw terminals
Fixing the socket mechanism in the socket
Checking the correct position of the mechanism
Installing and fixing the front panel
Preparation before installation
The preparatory phase of installation begins with the purchase of the desired model and the required number of outlets. It is important to consider where they will be installed and select the models that are most suitable in a particular room.
For the kitchen, it is important to choose the right number of outlets, and the power cable should be designed for the total load of all appliances that will be connected to them
Then you need to take tools that can come in handy during the installation process. This is the construction level, the socket itself, screwdrivers for tightening fasteners and screws, a construction knife or stripper for stripping insulation, pliers, a special screwdriver for checking voltage, electrical tape.
It is better to prepare all the tools necessary for installation in advance so that nothing distracts during the work
If you have to not just replace the old outlet with a new one, but install an additional place for connecting electrical appliances, then an extensive set of materials and tools can come in handy.
You will need a podrozetnik (mounting box), a puncher for making recesses for the working mechanism, nozzles for the perforator of the desired diameter, a ruler / tape measure, a simple pencil, building gypsum mixture.
If an outlet is to be installed in a concrete wall, then a perforator with a crown on concrete can be used to mark the desired diameter of the future socket. Then punch holes with a drill and remove excess pieces of concrete
Power outage is a guarantee of safety
The most important thing in any electrical work is a power outage! Without this, installation is not permissible.
Depending on what is installed in a particular apartment or house, you need to unscrew the plugs if a counter with plugs is installed or set the levers to the “off” position if there is an electrical panel with circuit breakers.
Then you need to additionally make sure that the work area is really de-energized. To do this, you have to take a prepared indicator screwdriver in advance and check for voltage in the wiring to which you want to connect the outlet.
The screwdriver for determining the voltage works like this: you need to touch it with a sting to the test wire, and hold the contact on the back of the screwdriver with your finger. If the indicator lamp mounted in the housing lights up, there is voltage
Choosing a power outlet
Having chosen the appropriate outlet models and having prepared the necessary tools, it remains to be decided how to make the correct connection of the outlet.
There are different schemes for connecting outlets to the mains:
- sequential when sockets are connected one after another;
- parallel, if each outlet has its own wire from the junction box;
- mixed, that option when some sockets are connected in one, and the rest in another way.
It is simple to determine the type of connection - if the additional place of connection to the power supply will be used for the operation of powerful devices - you should choose a parallel circuit. For low-power electrical mechanisms it is convenient to prefer a serial circuit.
Parallel connection is more reliable and allows you to turn on powerful electrical appliances. The advantage of a serial connection is saving wire and, as a result, money
Installation Box Installation
After making sure again that the workspace is de-energized, you can proceed to the next installation step. If this is not a replacement for the old outlet, then it remains to be noted exactly where one or more additional outlets will be located. For this, a ruler / tape measure and pencil are useful.
If you plan to change a damaged outlet or remodel the device, then you must act in a different sequence, described in detail in our article.
When choosing a place for the future location of outlets, you should focus on convenience during their future use. For sockets try to withstand the following distances:
- from the floor - not less than 30 cm;
- from the ceiling - not less than 20 cm;
- from the window - not less than 10 cm;
- from the baseboard, under which the wire is hidden, - 0 cm.
If the sockets are too high or low, it will be extremely impractical. The rules for the location of sockets and switches according to European standards are described in detail here.
There are no strict rules and regulations for placing outlets in the room. In this matter, you should adhere to the convenience for residents of a particular house / apartment
Having outlined the places to install the sockets, you should make holes for the mounting boxes. They, depending on the material of the walls, come in different diameters. Here you need to focus only on your situation. The main rule is that the hole should not be smaller than the socket itself.
The mounting boxes themselves are made of plastic, very rarely of metal. Plastic of good quality, non-combustible. It provides reliable insulation of the wires that will be located in such a box. The form of podrozetniki is round, oval and even square. Although it is most convenient to work with round plastic boxes.
In models for plasterboard walls, presser feet are provided to make it easier to attach. They are adjusted using special screws.
The sequence of the installation stage of the podrozetnik depends on the condition of the walls and the individual characteristics of the dwelling.
The most common situations are:
- full-scale repair of the premises. In this case, grooves are cut in the walls, a cable is laid in them that will power the sockets of the entire room, holes are made for mounting boxes;
- the walls are already finished with a decorative coating, and the electric cable is recessed into the wall. In such a situation, it is necessary to carefully release the ready-made holes for mounting boxes with a knife;
- the walls are finished, the cable is laid under the baseboard or hidden in the outer insulating box. Then you need to install external outlets;
- the walls are finished, the cable is not laid. Here you have to choose the most optimal installation option.
Convenient if you have to make only a hole for an additional outlet. Decorative overlay - the front part will cover the consequences of work.
Otherwise, if you do not need to damage the external wall decoration, you will have to approach the installation process creatively. One option is to use an overhead installation method, when the wire will have to be run over the wall, packing it, for security purposes, in a protective and decorative channel.
If during the process of connecting an additional outlet it is necessary not to damage the walls, then you can use overhead outlets
Also a convenient option is to install the outlet immediately above the baseboard, hiding the electric wire under the baseboard. In this case, you also have to use the invoice model.
In the prepared hole for the outlet, you need to install the installation box by threading the laid power cable into it. This hole must be thoroughly cleaned of dust and debris. You can use a vacuum cleaner or brushes. In the cleaned hole, the socket is securely fixed.
To do this, the prepared gypsum mixture is applied, and the mounting box with the threaded cable is immersed in the hole with the mixture. All work continues after the solution has set - it will take no more than 10 minutes.
A wire is being threaded through the socket to work with in the near future
In this way, one or more socket outlets are installed, as well as a mounting box for a dual outlet. If you have to install a number of outlets, then the installation boxes are installed in a row strictly horizontally or vertically - as planned by the owner of the room.
Most often this is a horizontal option. In this case, the single sockets are placed tightly to each other. They necessarily fit together, and their horizontalness is checked by the building level.
Connection and device verification
After fixing the box, work begins with the power cable coming out of it. First, first you need to cut off the extra piece, leaving about 7 cm from the edge of the undergrowth. Remove the braid from it - the upper insulating layer that combines the internal wires.
Inside, there are 3 wires of different colors - blue, white and yellow-green. This is the most common color composition used for marking. Instead of white, it can be brown, red, black and another.
Secondly, the wires must be freed from the individual insulating layer by carefully removing it with a stripper or knife at a distance of about 1 cm. Now we have to work on connecting them to the working mechanism of the outlet with grounding.
Yellow green is the color of the ground conductor. It must be connected to the central ground contact.
The wires must be securely fixed in the working mechanism of the outlet. They should not hang out and easily pulled out from a fixed place
Blue or blue-white is a working zero. This wire will connect to the extreme terminal of the working mechanism of the outlet. The remaining wire, most often it will be white or beige-brown, must be connected to the second extreme contact.
Depending on the type of outlet, the connection is made by pressing a special key if spring terminals are used in the mechanism, or is fixed between the plates with a screw clamp.
For fixation in a screw clamp, the sections of wires cleared of insulation are pre-bent so that they look like a small half-ring. Thanks to such preparation, it is easier to work: the wire will not slip out during the fastening period from under the screw. It is necessary to bend clockwise.
When all the contacts are connected, you must carefully bend the wires and carefully place them together with the working mechanism of the outlet inside the mounting cup. Then carefully screw the mechanism to the socket with the screws on its edges.
These screws will allow you to tightly fix the working part of the outlet. It is important not to overtighten the mounts so that nothing breaks.
When the outlet mechanism is installed in the installation box, you need to take the building level and check the horizontal installation
If everything is securely and horizontally fixed, you can proceed to the final stage of wiring - screwing the decorative lining. To do this, tighten the central screw without pulling it.
After installing the frame and the front of the outlet, it is important to tighten the fixing screw so that nothing is loose
Now the socket is connected in compliance with all safety rules. You can tighten the plugs or turn on the levers on the flap and check its operation. If all the actions were performed sequentially and correctly, then the new working outlet will happen to its owner for more than one year.
In order for the socket to serve for a long time and not cause trouble, you need to use it correctly, do not overload
The need to install an additional outlet may arise completely unexpectedly - the old one will fail or the new furniture will close free access to one of the existing ones.
Possessing information about the nuances of installing and connecting the outlet, you can easily cope with this work yourself.
How to properly connect the outlet block is described in detail in the next article.
Video # 1. Walkthrough in video format about installing an outlet:
Video # 2. A detailed and understandable video to help masters planning to install outlets with hidden wiring:
Video # 3. A warning clip against dangerous grounding methods, sometimes used by home craftsmen. If your neighbor advised something like this, it is better to refuse:
Having become acquainted with the main nuances and stages of installing the outlet, you can do this type of electrical work with your own hands. Everything that seemed unfamiliar and from this incredibly complex became clear and simple.
It is not necessary to call an electrician and ask him to connect an additional outlet when this work can be done independently, pleasantly surprising your loved ones.
Want to share the experience of an independent electrician? Have a desire to provide information useful for home masters? Please write comments in the block below, ask questions, leave a photo on the topic.