One of the prerequisites for the safe operation of a modern washing machine is the competent choice of the appropriate outlet for it. Agree that strict adherence to the installation technology of the connection point is no less important in safety matters.
Do not want to hire an electrician to install the outlet? Do you want to understand the intricacies of installation and connect the outlet yourself? We will try to clarify this issue - the article details the options for sockets offered by the modern market.
Also from our material you will learn how to properly install the socket for a washing machine in the bathroom, what tools and materials are needed for this. The installation process is sufficiently illustrated by the photo. Visual video tutorial on the rules for electrical work is given in the video block.
Key conditions for connecting the outlet
Projects of houses of the old construction did not provide for the installation of an outlet in the bathroom for two main reasons:
- first - objects of the old housing stock are not provided with a grounding system;
- second - in those days there was no powerful stationary household appliances, "powered" from electricity.
The household appliances used two or three decades ago did not involve stationary installation in bathrooms, due to their high level of humidity.
Current norms and standards allow you to place connection points in rooms with high humidity, but subject to a number of mandatory rules:
- Connection is made only to serviceable wiring made of a three-core copper cable.
- For installation, electrical outlets are used, the housings of which are characterized by reliable protection against moisture.
- The electrical equipment is equipped with a residual current device with a trip current within 10 mA.
- The power line must be equipped with an earthing circuit, so that the connection of a powerful device is made through a protective contact.
Grounding is a rigorous condition for installing the outlet both in a separate bathroom and in the combined bathroom, in which excess humidity is observed.
Information on how to properly mount an outlet with grounding is discussed in our other article.
In residential buildings, in which grounding is not provided, the protective transformer and UZO device cope with the task of suppressing the currents of exceeding and disconnecting the line. The only thing is that their level of protection will be slightly lower.
Image Gallery
Photo from
The competent device of the power point, designed to power the washing machine, will extend the working life of the equipment and ensure the safety of users
For almost all models of washing equipment, even for mini-modifications, a separate power line device with an individual outlet is recommended
The cable section for connecting the washing machine is selected based on the maximum power of the unit. In case of simultaneous powering from the line of several devices, their power is summed up, and the cable section is selected according to the total value
In the bathroom, IP class sockets are recommended for installation, designed to work in rooms with a high level of humidity. It is desirable that, in addition to the protective cover, the device also has curtains and a moisture protection system
A three-core copper cable with an earthing circuit is brought to the power point providing power to the washing machine, the cross-section of the cores is taken 2.5 mm²
Connecting the socket to the wiring must be performed flawlessly, the cable cores are tightly clamped by the terminals of the socket mechanism
To protect the power line that feeds the washing machine, a differential switch or a tandem of protective devices from the machine and a 20 A RCD must be installed in the shield
According to the regulations indicated in the EMP, sockets in rooms with a high degree of humidity are located at least 60 cm from the points of supply of water and pipes
Installing the outlet for the washing machine
Priority separate power line for the unit
The choice of cable for connecting the outlet according to the power of devices
Moisture-proof varieties of sockets for the bathroom
Suitable cable for laying the power line
Requirements for connecting the wiring to the terminals of the outlet
Circuit breaker to protect the power line
Choosing a place to set the power point
Some owners are irresponsible in connecting powerful household units, using extension cords and tees for this.
Connect a washing machine, which is one of the most powerful household appliances, through an extension cord is not worth it.
This is inconvenient and also dangerous. After all, with illiterate connection and installation, the likelihood of an emergency due to a short circuit increases, as a result of which even high-quality expensive equipment prematurely fails.
Automatic washing machines are installed in almost every home, and therefore the installation of a reliable and safe connection point is a necessity
If the family has a curious little fidget, then the presence of extra wires in the public domain and at all acquires special features.
Key parameters for safe wiring
Wiring in the bathroom should not only be perfectly functioning, but also safe.
In the event of a leakage of current to the body of the power unit, at the time of a short circuit or when it is touched by part of the body
Wiring Type Selection
In old buildings built several decades ago, wires with aluminum conductors were mainly used. They are not suitable for connecting modern powerful equipment.
The washing machine may only be connected via a three-core cable with a copper core.
You may also need information about what types of wires are used to install electrical networks in the apartment, discussed here.
In order to safely establish a connection point for a powerful household unit, a separate power line should be laid from the apartment panel and provide it with protection devices for wiring and the equipment itself
According to Clause 7.1.40 of the current EMP in rooms with high humidity, wiring is recommended to be closed.
To do this, the cable coming from the distribution panel is placed in the gate selected in the wall so that it is hidden and does not even partially come to the surface.
This measure protects the cable from direct contact with water, which is known for its excellent conductive qualities.
For the same reason, when laying in a channel hollowed out in wood, for example, it is not allowed to place an electric wire in a metal hose or in the cavity of a steel pipe.
The wire cannot be fixed with metal brackets devoid of rubber gaskets. The mounting brackets themselves must have a corrosion-resistant coating.
Cable cross section
In order for the wiring to withstand high loads from a powerful household unit, the cable cross-section should be correctly calculated.
It is determined by the same principle as when installing any other electrical equipment, taking into account the estimated load. The power of the washing machine is indicated in the instructions attached to it.
To connect household appliances in the bathroom, a cable is used made of three copper cores, one of which is connected to ground
For laying the power line, only a hollow wire devoid of defects is used. All joints are carefully wrapped with electrical insulating adhesive tape.
The presence of junction boxes in the bathroom is not allowed, inside the hollow body of which the cables of the connected devices are connected according to the scheme. Junction boxes are always placed outside the bathroom.
The procedure for determining the cross-section of the cable:
- Find out the power of the connected electrical appliance. In most cases, it does not exceed 3 kW.
- In accordance with the reference tables, the cable section is selected.
When connecting the outlet block, the total power of the devices that are “powered” from them is determined, after which, guided by the same reference tables, the permissible cable cross-section is determined.
Even if the machine consumes less energy, experienced craftsmen recommend making a reserve of power. After all, it is possible that over time a morally obsolete unit can be replaced with newer high-power equipment.
To connect a washing machine, the power of which does not exceed 3 kW, a three-core copper cable with a cross section of 2.5 mm is mainly used
Only copper wire is recommended for connection. Compared with the aluminum "fellow", it is preferable in that it has the best conductive properties.
The copper wire is able to withstand a high voltage with a smaller cross section: 1 mm cross section 2 kW load. And therefore, the wire laid in the strobe will take up half as much. In addition, it is resistant to oxidation and, with the assurance of electricians, has a service life of over 30 years.
Power RCD and machine
A cable leading a separate line to the bathroom is connected to the in-house distribution panel via an emergency shutdown device (RCD).
The main purpose of the RCD is to protect electrical appliances that are “powered” from the network from short circuits, and households from the risk of electric shock
The leakage current of the line protector when quick protection is needed should be 10 mA. This is due to the fact that the bathroom is characterized by increased humidity, and therefore the room is one of the rooms of increased danger.
The person feels the irritating effect of alternating current even at a value of 5-7 mA.
If the bathroom is “powered” by a group line, the maximum leakage current for connecting the wiring should be 30 mA. Such devices are cheaper than 10 mA, but they do not work as fast.
The device is triggered by an overload of 10 mA, preventing the failure of units connected to the mains and the occurrence of a fire as a result of a short circuit
For the installation of private houses and apartments, models most often used are combined with an automatic machine for protecting wiring - differential switches.
You may also have information about the differences between RCDs from the difavtomat, discussed in our other article.
Modular devices provide protection on three "fronts": from overload of the power supply network, from exceeding the permissible value of current leakage and from a short circuit on the line.
Some manufacturers produce sockets that are already equipped with a protective RCD, although the price is much higher than for stationary models
If there is no stationary RCD in the apartment in the distribution panel, a portable type RCD is used. They are connected to an existing outlet, and then electrical equipment is connected.
But the RCD itself is not a full protection. To protect the wiring and the unit itself from short circuit, a separate circuit breaker is installed.
The circuit breaker is selected, focusing on the cross section of the cable laid to the outlet and the load of the electrical network
Traditionally use a 16A machine. In any case, the rated current of the RCD must be one category higher than the rated current of the input automatic machine.
Mount Points
When choosing a location for a connection point, the key factor is not so much the proximity to the “powered” household appliance, but rather the distance from moisture sources and the height relative to the floor level. In the joint bathroom there are only 1-2 such safe places.
When choosing a location, the connection points are guided by the following parameters:
- All electrical outlets for connecting household appliances are placed at a height of not less than 60 cm from the floor. This requirement is explained by the fact that in the case of a breakthrough of pipes and heavy leaks, minimize contact with electricity, which can provoke an emergency.
- With regard to objects that are sources of water or splashes, sockets are placed with a distance of 60 cm. This solution also reduces the risk of moisture entering the connected device, making its operation safer.
When determining the height of the installation of outlets should be guided by the principle of "the higher, the better."
High-quality repairs in the apartment are not a guarantee that at a fine moment the stream from the common pipe will not flood or the “waterfall” will not spill from the neighbors living on the floor above. Therefore, some experts recommend equipping power sockets at a height of 130 cm from the floor.
Pure, impurity-free water is a fairly strong conductor of electricity, but the presence of complex chemical compounds and salts in it further increases its conductive properties
When designing wiring in the bathroom should be guided Clause 7.1.47 of the current EMP.
According to him, the room is divided into 4 zones:
- Red zone - referred to as zero, located within the washbasin, bathtub and in the area of the shower. No sockets can be placed in it.
- First zone - directly above or below the shower, bath bowl, capturing an area with a radius of 0.6 meters. It allows the installation of equipment necessary for the operation of plumbing with a capacity of 12 V. There should not be any sockets in this zone.
- Yellow or second zone - is placed after 60 cm, water heating devices are connected in it. Sockets cannot be installed either.
- Green or third zone - from the zone “2” it is located at a distance of 2.4 m. All IPX4 sockets and household units, “powered” from the network, connected through an RCD with a grounding contact, are located in it.
Outlets are not allowed to be placed on cold walls, on the surface of which condensate accumulates.
The installation of sockets and various control devices can only be done in the least dangerous third zone of the bathroom, subject to the requirements of the PUE
Sockets used to connect the washing machine in the bathroom must meet the following requirements:
- Enclosures for moisture-proof outlets provide protective covers to prevent moisture from entering.
- The internal part of the devices is insulated with dense rubber gaskets that minimize the likelihood of sparks between the contacts.
The level of protection of waterproof sockets is determined by the marking "IP". The higher the digital score, the more reliable the device. So, the “IPX1” class models protect only from small splashes, and “IPX4” - they are not afraid even of direct water jets.
The designation “IPXY” indicates the degree of protection against moisture (“Y”) and dust (“X”); for installation in bathrooms, the parameter "Y" must be at least class 4
The subtleties of connecting the outlet for the washing machine
When planning to connect a washing machine in the bathroom of a house that is more than 20 years old, carefully inspect the wiring first. Most likely, there are aluminum wires.
They can not be used to connect powerful appliances, which include a washing machine. Since the conductivity of an aluminum core is almost two times lower than copper, and with the appearance of oxides on the surface, the value still decreases.
To lay the power line for connecting the washing machine, you will need a cable with aluminum conductors thicker than with copper, which will not affect the total cost in the best way. The quality of the wire connections must be impeccable to prevent overheating.
When operating the power point, you will have to regularly check and tighten the screw clamps.
Aluminum wires must be replaced without fail, because for such a long service life the alloy loses its elasticity and simply crumbles
Be prepared for the fact that replacing obsolete aluminum wiring with a copper analog will cost a pretty penny. But the safety of households and the normal operation of equipment directly depend on it.
Some owners in the bathroom install one connection point for all electrical appliances. To do this, lay a wire with a cross section of 2.5 mm, to which the outlet unit used to “power” not only the washing machine, but also other electrical appliances is connected in a loop manner.
Experienced craftsmen do not recommend doing this, but it is advised to lay a separate wire to the washing machine.
If you still plan to put several outlets on one line, pre-calculate the total power of simultaneously working electrical appliances
When installing multiple outlets, it is advisable to arrange the connection points as compactly as possible. You can also bring the underfloor heating control panel to the outlet block.
As a protective element, you can install a switch for the outlet itself. But it should be considered only as a safety option, serving as an addition to the general security system.
Mount Point Technology
At the time of installation of the outlet, an automatic machine or RCD should already be in the electrical panel, and the wire itself is brought to the bathroom.
Before proceeding with installation of the connection point, make sure that the wire is not energized by touching the cable ends that are cleaned from the braid with an indicator screwdriver
Step # 1 - laying the cable and installing the socket
To perform hidden wiring in the cavity of the wall using a punch, a strob is made. It is laid along the smallest path under the ceiling parallel to the floor surface.
To the outlet, the line is lowered strictly down perpendicularly. The wiring is fixed in the strobes using dowel clamps.
To outline the location of the outlet, a device case is applied to the center of the laid strip. Using a marker make marks for drilling holes. Having outlined the location of the outlet, use a puncher equipped with a D 68 mm crown to make a hole in the wall.
With the help of a hollow drill, you can quickly and economically make a large diameter hole in the wall for installing a standard-sized plant socket
The walls of the hole made are cleaned from dust and fragmented wall elements. In the prepared seat mount the socket.
The selection of the wall socket depends on the type of wall. For installation in concrete, mounting blocks are used without any fixing elements. For drywall - plastic cups equipped with pressure plates for fixation from the back of the sheet. You can read more about the installation technology of the socket in another article.
Having fixed the undergrowth in the wall with the help of presser feet, or by applying putty or alabaster mortar to the surface, clean the internal cavity of the box and remove the wire
In the installed socket, the terminal block will be hidden for connections to the wiring hidden in the wall.
Step # 2 - connecting the terminal block
Decorative elements are removed from the outlet housing, leaving only the terminal block. At the terminals, the fixing bolts are loosened, with the help of which the bare ends of the lead wires are fixed.
The ends of the electric cable with a cross knife or side cutter are cleaned from the braid, directing them in the opposite direction to the movement of the tool
For ease of connection, the insulation of the lead wires is made in different colors. The ground wire is painted in a green-yellow sheath, the phase wire is represented by a red or brown sheath, and the zero wire is in blue or blue insulation.
The ends of the wires removed from the plastic “glass” are brought to the contacts and inserted into the terminals. The phase and neutral wires are connected to current-carrying terminals: phase on the right, neutral on the left. The ground conductor is connected to the terminal indicated by the abbreviation "PE".
The grounding conductor is connected to the upper or central terminal equipped with "antennae" fixed on the device
In no case do not connect “zero” to the ground terminal. Otherwise, if the working “zero” burns out, the reverse “phase” will break through the shield on the body of the machine connected to the network.
The socket housing with the connected contacts is fixed to the socket by screws or spacer tabs. After fixing the unit, check the quality of the connection of the contacts and the tightening of the bolts on the terminal blocks.
At the final stage, a decorative cover is installed.
Tips for installing connection points in the bathroom:
How to lay the wire for the washing machine:
Works related to electrical wiring belong to the category of increased danger. And they should be carried out with utmost care.
If you are not able to correctly assess the situation and are not confident in your own abilities, do not experiment. The solution to this difficult task is best entrusted to a professional electrician.
Did you do the installation of an outlet for connecting a washer? Tell us what turned out to be the most difficult for you and how the connection point is functioning now.
Perhaps you have questions after studying our instructions? Feel free to ask us by filling out the comment form under this article.