Buckets and hoses when watering a country garden are used less and less. Often the owners of plots in summer cottages prefer to make their life easier by arranging an irrigation system. And immediately the question arises of installing a garden water supply system designed to supply water to the beds and distribute it there.
We will talk about which pipes for irrigation in the country are better to choose for the construction of a trouble-free system. In the article we presented, we analyzed popular schemes and materials used in the construction of automatic irrigation. Given the technical characteristics and evaluation of all applicable varieties.
Briefly about summer irrigation systems
Irrigation of beds and fruit trees in the country with the help of pipes can be organized in several ways. When choosing a particular system, it is necessary to build on the type of soil on the site, the general climatic conditions and the desire (or unwillingness) to spend your time watering the garden.
The manual method of moistening the soil is too laborious. Country cottage is intended for relaxation. Often, citizens go to her on weekends to work there in sweat. There are those who even like this pastime very much.
But most just want to relax outside the city. However, almost everyone has a small garden, apple trees and currants in the country. And they need to be watered.
All artificial irrigation systems in the summer cottage are divided into two types: automatic and semi-automatic - the former imply shifting control over the irrigation process entirely to automation, and the latter involves partial human participation
By the method of water supply, three types of non-manual irrigation systems are distinguished:
- Drip surface.
- Intrasoil.
- Sprinkling (spraying).
The technology of creating "artificial rain" is the most common. To install such a system in a summer cottage, it is necessary to install several rotary sprinklers and bring water pipes to them. However, such sprinklers spend too much water.
Part of it simply evaporates before it reaches the soil. This type of summer irrigation is mainly intended for watering large lawns.
Two other options for automatic irrigation systems include the supply of moisture to or onto the soil directly next to the plant to be watered. For this, perforated pipes, droppers and bubblers are used. A similar method of irrigation is more economical in terms of water consumption, but because of the large length of the pipelines are more expensive in the device.
For a subsoil irrigation system, a perforated pipeline will have to be buried in the ground at a depth of 20-30 cm, and for a surface pipe, it can be laid on the ground
You will find all the details about the choice of pipes for drip irrigation in an article devoted to this interesting issue.
Pipes for all types of garden watering are selected by diameter in the range from 25 to 32 mm. If the pressure in the central water supply at the cottage is low or water is supplied to the system from the tank by gravity, then the cross-section should be closer to the upper boundary. Otherwise, you can save by taking pipes and fittings with a diameter of 25–27 mm.
At lower values, the pipeline will work inefficiently, watering the ground for too long. And with large sizes, it will prove to be an unnecessarily expensive pleasure. The flow of water will still fill such a pipe only halfway. A large-diameter pipe products are obviously more expensive than their thinner counterparts.
The rules and guidelines for choosing a hose for irrigation of cultivated plants and green spaces in a summer cottage are set out in an article that we recommend reading.
Features of metal water pipes
Products made of polymer compounds are now widely used. This material does not rust, cheap and easy to install. But metal is also not being written off.
At domestic cottages, you can find a lot of metal water pipes used to irrigate plantings on the site. In many respects, this is a legacy of the Soviet era when there were simply no polymer pipes. However, not everything is so simple, the metal has a lot of advantages.
The owners of summer cottages prefer to equip the irrigation with precisely metal pipes because of their durability and strength - if they are accidentally stepped on, they will definitely not break
Among the advantages of irrigation pipes of their metal are:
- fracture resistance;
- frost resistance;
- long service life of 20-30 years;
- high mechanical strength.
Metal water conduits can be safely laid under pedestrian walkways and areas near the garage where vehicles are installed. They will not break under pressure from above. They can bend, but not break.
Polymeric products are unlikely to withstand such loads. Polymer pipes are too fragile compared to metal pipes. And in winter, water pipes collected from them without insulation on the street are better not to operate at all.
Metal pipes for organizing irrigation in the country are made of suitable materials:
- become;
- galvanized steel;
- copper.
The main disadvantage of the first option is its high susceptibility to corrosion. When in the ground, the steel pipe inside and out begins to rust quickly. The use of galvanized stainless steel with greater corrosion resistance allows you to extend the life of such a conduit, but leads to its significant increase in cost.
Image Gallery
Photo from
Stationary country pipeline
Connecting hoses to metal pipes
The combination of metal and polymer pipes
Stop valves for metal pipes
Rust is not a problem for copper pipes, but they cost a lot. Plus we must not forget about the problem of theft. Not all holiday villages are protected. And copper is a welcome prey for uninvited visitors visiting other people's empty cottages in the winter for the purpose of theft. It will always be in price at the bases for the purchase of scrap metal.
Compared to plastic analogues, pipes made of metal are heavy and more difficult to install, but if they are not stolen, they will last much longer than their counterparts.
Often, an irrigation system is laid in the ground. Digging it up for the winter means loading yourself with extra work. Usually it is preserved and remains in the ground. But plastic becomes brittle during frosts, which often leads to its destruction.
And steel and copper calmly tolerate negative temperatures. Pipes from them can be safely left in the ground for the winter. It is only necessary to drain the water from the cold.
The following article, which we recommend reading, will familiarize you with the marking and assortment of fittings for connecting steel pipes.
Overview of polymer pipes for cottages
There are several types of pipes made of plastic, which vary greatly in characteristics. Some of them can be used for watering at the cottage all year round, while others can be used only in summer and autumn until frost. Some are recommended to be laid on the ground, while others should be buried in it to protect the pipeline from direct sunlight.
Plastic cottage water conduit for the garden can be performed using pipes made of polyethylene (HDPE), polypropylene (PP) and polyvinyl chloride (PVC)
The assembly of polymer pipes for irrigation system irrigation in the country should not cause problems. Do it yourself. Plastic is lightweight, easy to cut and join. It is only necessary to correctly draw up a diagram of the pipeline, accurately calculating the required number of fittings and footage of pipe products.
Image Gallery
Photo from
Practical and technological pipes
Polymer pipe sprinkler system
Branch line
Pipes and fittings for assembly of the pipeline
Safe contact of pipes with water
Complete irrigation system
Connection of a plastic pipe to a metal
Polymer communications at the cottage
Option # 1: Polyethylene (PE)
The first in polarity and durability are low-pressure polyethylene (HDPE) pipes. The term "low pressure" here means the manufacturing technology of a plastic product, and not the performance of the pipeline. PE is quite suitable not only for a low-pressure country water conduit, but is also widely used in the installation of heating systems and hot water supply.
I make HDPE and LDPE pipes from polyethylene - in the country it is better to use the first option, which is stronger, as well as resistant to frost and water hammer
You can find cross-linked polyethylene products labeled PEX in stores. Such pipes have higher strength characteristics, but also a higher price. Acquiring them for irrigation water in the country is impractical. There are cheaper analogues that can cope with the task of supplying water for watering the garden without problems.
Image Gallery
Photo from
Summer water supply from pipes PND
Polyethylene pipes for transporting water
Set of fittings for assembling the system
Underground option for laying HDPE pipes
In comparison with other plastic pipes, polyethylene is more:
- flexible and elastic;
- resistant to ice formation (do not burst);
- strong on a gap and a bend;
- the roads.
Operating temperature of polyethylene pipes - from -70 to +800C. They are not afraid of frost. The irrigation system from them will calmly winter in the ground, and in the spring it will start working without any problems and additional tricks.
Connect HDPE pipes by welding and using fittings. Use the first method in the country is not worth it. The irrigation system in this case is non-separable. Plus, for work, you will need to buy or rent a special soldering iron, which you need to spend extra money on. This option is more for home water supply systems. It is better to use compression fittings.
If necessary, the couplings can be untwisted, which makes it easy to replace a leaky area or to redo the entire wiring diagram of a country water supply
Another plus in favor of the choice for organizing watering at the cottage of polyethylene pipes is their resistance to ultraviolet radiation. The irrigation system of them can be made superficial by laying it on the soil.
PE pipe walls will not collapse under the sun. It is impossible to say similar things about other polymer pipelines. They are not at all friendly with ultraviolet rays.
Option # 2: Polypropylene (PP)
Polypropylene pipes in comparison with the first option are more resistant to high temperatures, but do not tolerate cold. They are mainly used for the installation of heating systems. But for watering the garden, they are also quite applicable.
The polypropylene pipes are joined by diffusion butt welding or into the socket using an electric soldering iron with replaceable nozzles of the appropriate size
Most often, PP pipes are connected with fittings produced for soldering or cold welding. To do this, their ends are heated to 260 degrees so that the polymer begins to melt, and then the connecting part is inserted. After cooling, such a joint turns into a monolith, which is difficult to break.
The system of garden watering from polypropylene pipes refers to a non-separable type. And given that this plastic is not afraid of ultraviolet radiation, especially black products with enhanced UV protection, it also does not need to be buried in the ground or covered from the sun.
Plus, the use of fittings and diffuse soldering technology complicates installation work. Polypropylene is not the easiest and most convenient option for a summer residence.
By the high cost of the pipe, PP loses to the polyethylene analogue. However, fittings for it (tees, transitions, turns) are several times cheaper than those that are needed to connect PE products. On the other hand, polypropylene pipelines are more durable. Being in the ground, they are able to withstand the weight of a person and not break.
Image Gallery
Photo from
Polypropylene irrigation system
Rigid Design
Suburban automated water supply
Laying in open areas
Gander assembly for water supply
Laying a winter country water supply
Storage tank with connected pipes
Location close to footpath
Option # 3: Polyvinyl Chloride (PVC)
The cheapest option is polyvinyl chloride (PVC). These pipes are characterized by low resistance to ultraviolet radiation. But the sun should not be left for a long time. Frosts are not so bad for them as for polypropylene products. But at low temperatures they become more fragile and are easily damaged by a gentle blow.
The main advantage of PVC pipes is its cheapness even in comparison with other plastic counterparts, of which they will be able to mount the cheapest watering system in the country
Fittings and special glue are used to connect the PVC pipeline. The general installation technology is comparable to the polypropylene version, only to soften the polymer instead of high temperature adhesive is used. The resulting water conduit is non-separable.
If the pipeline for watering the garden of polyvinyl chloride is not protected from the sun, then it will not last long. With prolonged exposure to sunlight, photodegradation begins in this polymer compound. As a result, the product from it becomes less durable and ductile. PVC water walls are made harder and more brittle.
Image Gallery
Photo from
Laying an irrigation system in the soil
Temporary water line
Pipes and fittings for piping
Homemade drip irrigation system
For installation of irrigation in the country, PVC pipes should be taken in dark color. They contain additives that increase resistance to UV. And the sun does not directly affect the water in such a trunk, which reduces the risk of overgrowth inside the algae.
Regardless of the type of polymer pipe chosen, autowatering from it can be done by yourself. The main thing here is to weigh all the pros and cons of each plastic, without exception. The cheapest option may be both the most successful investment of money, and their waste.
If mistakes are made during the selection of consumables and installation, then the garden conduit for irrigation will not last long.
Often, the main line of such a pipeline is made of stainless steel, and bends to beds and trees are made of polymers in a detachable design. By winter, these polymer pipes can be removed and stored. Such a system will be the most durable and reliable.
The following video materials will help you navigate the various types of polymer pipes, which are most often used in the installation of automatic and semi-automatic irrigation systems in the country.
Video # 1. The organization of drip irrigation in the garden with your own hands:
Video # 2. Technology of installation of polymer water supply for irrigation of beds in the country:
Video # 3. In detail about polyethylene water pipes:
For the device of watering in the country garden requires very little time. But how much energy will be saved. Pipes for such a system can be used both metal and plastic.
Their choice largely depends on soil moisture technology. Making holes for irrigation in a steel product is still a pleasure. Of polymer products, polyethylene will last the longest. But if at the forefront is the cheapness of execution, then it is worth choosing PVC.
Tell us about how and from which pipes you assembled an irrigation system in a summer cottage. Perhaps you have information that will be useful to visitors to the site.Please write comments in the block below, ask questions, publish photos on the topic of the article.