Metal and ceramic pipes are being replaced by polymer products. They are becoming more popular due to their obvious advantages - durability, lightness, corrosion resistance and aggressive substances. With careful handling, the plastic pipeline can last at least half a century.
The main thing is to provide high-quality, tight docking of elements. To assemble parts, use special glue for PVC pipes. The so-called “cold welding” allows you to build a water supply system with minimal labor. However, the use of glue has a number of nuances that must be studied before starting work.
The article outlines the advantages of the adhesive method of joining plastic pipes, provides an overview of the best manufacturers, and also gives recommendations on choosing the right composition. Step-by-step instructions for bonding PVC products will help you assemble the pipeline yourself and avoid possible errors.
Advantages of adhesive pipe joints
Pipes made of polymers are welded, glued or mechanically interconnected. The first method is the most popular. For welding use special equipment and nozzles, selected according to the diameter of the pipeline.
It is better to entrust such work to professional masters. Option - rent or buy a welding machine. It is expensive, but it will help to master another useful skill.
Materials for the polymer pipeline are safe. They do not emit toxins into the atmosphere, do not enter into chemical reactions, so they can be safely used for installation of plumbing and sewer systems
The adhesive bonding method is less common, but no less effective. It is commonly called “cold welding”. Glue joints are as reliable (and sometimes even more) as welded.
The only caveat: almost all types of adhesives for plastic pipes are designed for cold water systems and can quickly lose their properties under the influence of high temperatures.
Polymer pipelines with adhesive joints remain completely smooth from the inside. Damage and roughness do not appear on the surfaces, which in the future can provoke the appearance of blockages (+)
Advantages of bonding PVC pipes using special compositions:
- Leak Risk Reduction. When gluing pipe sections, the parts are connected at the molecular level. The seams are absolutely leakproof, and they can start to leak only under the influence of high temperature or pressure.
- Minimum labor costs. For gluing pipes do not need any additional complex processes. This is a simple method that does not require special skills.
- Fast and cheap installation. All operations can be done with your own hands. It is enough to buy materials and choose the right adhesive composition. No need to look for a welding machine.
- Low energy consumption. The apparatus for welding polymer pipes works from the mains, and equipment is not required for gluing parts. This is an additional saving on materials and energy.
- Versatility. The method is suitable for connecting pipe parts of any diameter - from 6 to 400 mm. It can be used in the installation of plumbing and sewer systems.
Cold welding is a cheap and convenient way to install a pipeline. To use it, you do not need anything that can lead to more expensive work: you do not have to spend money on additional connecting elements or special equipment.
Given the low cost of the polymer pipes and adhesives themselves, piping systems are relatively cheap, and are installed in a matter of days
The principle of operation of all types of glue for polypropylene pipes is approximately the same. The compositions partially dissolve the polyvinyl chloride and firmly bind the particles.
The composition includes additives that improve adhesion. When bonding, the solvent evaporates quickly, and the composition hardens and gains strength. The result is a high-strength connection.
The connection with glue is tight, but for greater reliability, you can use the combined method of fastening pipes - with adhesive and fittings
On the market you can find products for creating high-strength compounds from both foreign and domestic manufacturers.
Review of the best brands
Trademarks lead in all ratings of adhesives for PVC pipes Tangit (Germany), Genova (USA), Griffon (Netherlands), Gebsoplast (France). Buyers speak well of adhesives "Phoenix", “Vinylite”, “Mars” and others, but they are not so in demand and popular.
All types of adhesive for polymer pipes operate on the same principle, are available in packs of various volumes, and the appropriate composition should be selected depending on the purpose and technical characteristics.
Image Gallery
Photo from
Together with the glue, Tangit solvent can be purchased for cleaning and degreasing surfaces. This improves the quality of joining parts. Advantages of the glue itself are reliability, convenient consistency, high speed of hardening. Another plus is transparency: even if the adhesive comes out and is not removed in time, traces will be invisible on the assembled pipeline
Under the brand name Genova, high-quality pipes and fittings are produced. The manufacturing company made sure that customers experience as little installation difficulties as possible. The glue is suitable for assembling sewer, water pressure and pressureless pipelines, irrigation systems, etc.
The Griffon composition is used for gluing almost any polymer products, connectors, pressure and pressureless pipelines. The composition is suitable for water supply, sewage, drainage and ventilation. One liter packaging is enough for the installation of the system, and the remaining glue can be used for other purposes.
The main advantage of Gebsoplast adhesive compositions is their resistance to high temperatures. Gebsoplast Gel is ideal for stand-alone sewer systems, and Gebsoplast Gel Plus is well suited for plumbing systems. Glues are dense and do not spread during operation. The curing time of the composition is less than a day
Reliable "couple" - Tangit glue and solvent
Glue Genova - composition from the manufacturer of pipes
Griffon universal adhesive in 1 liter packaging
Gebsoplast glue for water supply and sewerage
Rules for working with adhesives
When working with glue, you should always read the recommendations of the manufacturers. Many compounds cannot be left open for more than a few minutes, as they quickly set, which makes their further use difficult. The average time that an adhesive can remain open is 4-5 minutes.
In summer and winter, the compositions freeze most quickly: at high ambient temperatures, the adhesive may become unusable after 1-2 minutes, and at low - viscosity increases. Therefore, you should pay attention to the manufacturer's instructions regarding the temperature regime
When buying a specific brand of glue, you should pay attention to its preparation for work. Some types are quite simple to mix, but two-component compounds have to be properly combined, to monitor their consistency.
There is a risk of improper mixing, which leads to a loss or change in adhesive properties.
Pay attention to solvent for degreasing surfaces. It is best to choose the composition of the same company as the glue. Even if it is written on the adhesive packaging that degreasing is not necessary, it makes sense to wipe the surfaces to be glued with a high-quality solvent
Color and viscosity matter. Experienced plumbers prefer medium viscosity formulations. They are easy to apply, and when connecting parts such glue does not spread, it does not have to be removed once again with napkins.
As for color, the colorless composition is suitable for white and colored pipes. It is not visible, even if the drops protruded beyond the bonded area and froze.
Criteria for choosing pipes and type of glue
When buying pipes and fittings, they pay attention to the purpose of the products, the diameter, wall thickness of the products. Of fundamental importance is the brand.
A good brand is not only money invested in advertising, but also real quality, thanks to which the products do not lose market positions. It is always better to choose reliable manufacturers, even if their products cost a little more than the unknown counterparts.
Pay attention to the marking. It contains many technical and operational characteristics: diameter, pressure rating, purpose and scope of the pipe (+)
When choosing components, it is worth reading the technical documentation, which indicates the purpose of the product, the temperature regime at which it remains functional, safety factor and service life, manufacturer's warranty.
Carefully consider pipes and fittings. Their internal and external surfaces should be smooth, and the structure should be homogeneous, without signs of delamination, sagging, cracks and other defects.
The condition of the packaging indicates how the products were loaded, unloaded, transported and stored. If its appearance leaves much to be desired, it is worthwhile once again to make sure that the pipes themselves are not damaged
When buying glue, consider not only the characteristics of the composition itself, but also such nuances:
- Place of installation of the pipeline. Working conditions at different sites can be very different in terms of degree of contamination, the temperature of the liquid in the pipes or the environment, and other important parameters. It is possible that for different areas the adhesive compositions will have to be selected separately.
- Fluid pressure. All manufacturers take care that they do not have unnecessary complaints from customers, therefore they must indicate what pressure the pipe glued by their composition can withstand. The higher this characteristic, the more reliable and more expensive the adhesive. Saving irrationally. It is necessary to compare the pressure in the water supply with the value indicated on the adhesive packaging.
- Load Features. Often pipelines can move due to mechanical stress from the outside or due to pressure from the inside. If serious shear loads are possible at the joint, a more reliable adhesive should be selected.
- Temperature mode. Some types of glue are perfect for arranging an HVS system, but will be ineffective for a sewer pipeline, as the temperature of the effluent is different.
When choosing glue, it is important to consider the characteristics of the compositions. Usually they include volatile toxic substances. People who are prone to allergies, it is better not to work with toxins: you will either have to entrust the installation of the pipeline to specialists, or choose a different method of connecting parts.
Glues for plastic pipes should be used outdoors or in well-ventilated areas where access by unauthorized persons, children and pets is prohibited.
Pipes, fittings, adhesives should be bought only at specialized retail outlets. You should not save, choosing the "same" products in the spontaneous market.
Popular products are often faked, so it is better to contact sellers with a good reputation who monitor the reliability of their suppliers, are ready to provide guarantees or exchange low-quality goods.
Step-by-step instructions for using the composition
Before you start gluing plastic pipes, make sure that the room provides normal air circulation, and the temperature is in the range of 5-35 ° C.
In addition to materials, some tools will be required for work:
- for marking - marker and measuring tools;
- for cutting pipes - pipe cutters, jigsaw or hacksaw;
- for cleaning surfaces - sandpaper;
- for degreasing - solvent;
- for applying the composition - the glue itself, a brush made of natural bristles (some adhesives, including Tangit, are immediately equipped with a suitable brush) or a glue gun.
Surface preparation - an important step in gluing parts. They should be perfectly smooth and fat free. If contaminants remain on the pipe, glue will be taken only on top of them, form a film, but there will be poor contact with the surface itself. This can lead to leaks over time.
PVC pipes are prepared for the upcoming gluing in several steps:
Image Gallery
Photo from
Step 1: Acquisition of socket fittings
Step 2: Fitting and marking pipes
Step 3: Pipe marking for preparation
Step 4: Cold Welding Rules
Piping bonding technology:
- Pipe marking. Before starting installation of the pipeline, a project and a detailed diagram should be prepared. Pipes are measured and marked on them.
- Pipe cutting. The next stage is the preparation of segments of the desired length. Pipe cutters are best used, but other tools will do. The main thing is that the cutting points are even. The edges are cleaned with sandpaper.
- Bonding system elements. The most convenient is a glue gun. With its help, you can evenly and accurately distribute the composition on the surface. If there is no gun, use a brush. The glue is applied so that in the selected area there are no free areas left from it.
- Connection parts. To connect, the elements of the system are pressed against each other for at least 20-30 seconds. During this time, the composition thickens, becomes more viscous. Then the item can be postponed for a day. It is important that the compression force is sufficient, otherwise the joint may leak during operation.
- Pipe cleaning. No matter how neatly the adhesive is applied, it may protrude beyond the intended area. It is removed immediately until it has frozen. For this, a wet towel, rag or sponge is suitable.
- The polymerization of the composition. It takes 20-24 hours to harden the glue, so it’s better not to touch the system earlier. It is impossible to shift, disconnect and reconnect parts, to let water through pipes.
When the polymerization of the adhesive is completed, you should check the efficiency of the system. It is launched in operating mode and carefully examined all the joints.
If it doesn’t leak anywhere, everything is in order. If leaks are detected, the connections are additionally sealed.
Image Gallery
Photo from
When installing pipelines, it is important to immediately immediately cut off the necessary pipe pieces to avoid unnecessary material overruns. For this, special scissors are used. If the purchase of scissors is economically disadvantageous, as you only need to make a couple of cuts, you can use a hacksaw, a jigsaw or even a saw. In this case, it is advisable to work on an equipped workbench.
The chamfers are chamfered on the outside to facilitate entry into the fitting. So the pipe will not catch on the edges, and the finished connection will become more reliable and tight. You can use a regular knife to chamfer. After this, clean the pipe section.
Before gluing, make sure that all pipe sections are prepared correctly. For this, the system is assembled first without glue. If everything is in order, the parts are degreased with a suitable solvent. The glue is thoroughly mixed until completely homogeneous, and then applied to the desired surface with a continuous thin layer
Lubricated with adhesive parts of the pipeline are connected and tightly pressed against each other. They should be kept under pressure from 20 seconds to several minutes to begin the process of polymerization of the composition.The longer and denser the elements are pressed, the greater the likelihood of their strong adhesion
Stage 1 - Smooth Pipe Cutting
Stage 2 - chamfering the pipe
Stage 3 - applying the adhesive
Stage 4 - the process of bonding parts
An important nuance: when gluing parts you need to work very clearly. A piece of pipe is inserted into the fitting in one motion. It should not be sharp, but fast. When the pipe is inserted, it must not be rocked or twisted so as not to reduce the strength of the connection.
Using cold welding, truly high-quality water and sewer pipelines are assembled. Moreover, the method can be equally effectively used when laying communications in a private and multi-story building.
If there is no self-confidence, it makes sense to hire professionals. But for house owners who can handle tools, it will not be difficult to independently perform the work. To help craftsmen, we offer useful video materials.
Why is it better to stick PVC pipes together? An experienced master answers:
How and how to cut polymer pipes is described in the following video:
The ideal choice is a multifunctional tool that evenly cuts pipes and immediately chamfers:
The choice of glue directly depends on the type of pipe, so they should pay attention to:
A simpler technology for joining polymer pipes than gluing does not exist. The method is cheap, convenient, and not inferior to welding in efficiency. Almost any person can handle the installation of the pipeline with glue, because he does not need any special skills.
The main thing is to choose the right pipes, glue and tools, and when working, be careful and accurate.
Share your experience with gluing PVC pipes with readers, tell us what kind of glue you used in your work. Please leave comments on the article and ask questions of interest. The feedback form is located below.