Typically, fixing the toilet to the floor is carried out at the stage of housing construction and is carried out by professionals. However, during operation, sometimes there is a need to replace equipment, and here the owners sometimes end up in a dead end.
Someone immediately turns to a company that provides the appropriate services, but some home masters decide to save money and make a rearrangement on their own. There are no big difficulties in this, and installation methods are quite accessible even for people who do not have a lot of repair work experience.
In this article, we will talk about various ways of fixing the toilet to the floor, as well as what tools and materials will be needed for this.
Methods for fixing toilets to the floor
You can attach a toilet to the floor in several different ways.
The most popular include:
- landing on the installation kit (dowels);
- the use of various adhesive compositions;
- installation on cement mortar;
- fixation on taffeta;
- side mount.
The choice, first of all, depends on the quality of the floor in the toilet or bathroom and on the material of its finish, since the same method of fastening is not relevant for all surfaces. Features and nuances of different installation options depend on the design and type of discharge into the sewer.
Complete with toilets of almost all modifications is a standard installation kit (dowel-screw). It is suitable for installation of equipment, but provides for the compact to land on an absolutely flat surface that does not have errors and incline.
Plumbing, attached to the floor in this way, is distinguished by good structural stability and does not swing even during intensive use. However, the method is not suitable for all models and is usually applied to toilets of small size and light weight.
Fixing a toilet bowl to a tile on cement is considered one of the most durable options for connecting the equipment base to the floor. The experts reproach this method only with the impossibility of quickly dismantling the product in case of urgent need.
That is why only compacts that are supposed to operate for a long time without replacement are “planted" on cement.
If the “underfloor heating” system is installed under the tiles in the bathroom, it is not possible to drill tiles or use bolts and wall plugs. In such cases, it is worth using sealant, cement or epoxy to fix the toilet. All these materials will ensure a compact position and will not damage the equipment laid under the finish.
The hidden method of fastening is not much different from the open, it only requires a lot of effort and labor. But all this completely pays for itself, because externally the design looks more attractive, neat and aesthetically pleasing, and the connecting elements are disguised from the eyes and do not spoil the interior design.
Preparatory activities before installation
Regardless of how it is decided to fix the toilet to the floor of the bathroom, they always begin work with collecting a drain tank. The process directly depends on the compact model and is usually described in detail in the instructions that came with the equipment.
At the second stage, water supply and discharge units are prepared. If the connection is made to an old, cast-iron riser, it is first cleaned and dried well, so that later there are no problems with the tightness of the corrugation.
After completing these two steps, they proceed to the third and ensure the availability of all connecting elements, materials and a suitable tool for the implementation of the necessary installation and plumbing activities.
Tools and materials for work
In the process of work, depending on the type of floor in the bathroom, use tools such as:
- drill with drills of different diameters (when it is planned to drill concrete or cement);
- hand drill and drill for wood or ceramics;
- screwdriver set, hammer, pliers, wrenches;
- tape measure, marker;
- sandpaper of large and small section;
- spatulas (if it is supposed to fix the equipment on glue, epoxy resin or cement);
- scissors, construction knife.
In addition to the above items, you will definitely need:
- dowels, screws with gaskets under the head;
- connecting corrugation;
- flexible hose for connecting to cold water equipment;
- cement;
- adhesive composition (silicone sealant, epoxy resin, liquid nails);
- a piece of thin rubber for a sealing gasket under the base;
- a board with a thickness of 28-32 millimeters, if it is necessary to raise the plumbing above the floor or fixing is carried out to a wooden coating.
Having all this at hand, there is no difficulty in coping with the task.
How to put a toilet on the dowels?
Fixing plumbing to the floor on the dowels is considered the most affordable and practical option, requiring the least amount of time to carry out work. However, for correct installation, it is necessary that the surface of the floor in the bathroom is perfectly flat and smooth.
Even the most insignificant differences in height negatively affect the quality of the flush and make it difficult to fully use the plumbing for its intended purpose.
If the floor surface is tiled, for installation you will have to drill holes in the tile. This event requires accuracy and some skill.
To prevent the tiles from cracking during processing, it is recommended to use diamond or victory drills, and seal the place where the hole will be with masking tape so that the drill does not slip
When working, you cannot rush and put too much pressure on the tool, otherwise cracks may appear on the tile and you will have to remove the fragment.
In addition, the dowel mount is designed primarily for compact, lightweight toilets of small dimensions. For heavy, massive models, this option is not considered the most suitable, since it does not provide a reliable and stable position of the plumbing fixture.
The following photo selection will clearly demonstrate the steps of installing and securing the toilet using dowels:
Image Gallery
Photo from
Step 1: Buying a toilet bowl and pipes to connect
Step 2: Assembling the sewer outlet
Step 3: Fitting and marking the installation site
Step 4: Drilling Floor Holes by Marking
These steps are the preparatory stage, having successfully dealt with them, you can begin the main work:
Image Gallery
Photo from
The floor area on which the toilet will be located is covered with an insulating substrate. It is needed to ensure a snug fit on the toilet leg and prevent damage to the floor.
Combining the technological holes of the toilet with the holes drilled in the floor, we fix the plumbing
Carefully, in accordance with the outline of the toilet bowl foot, we cut off the insulation material, being careful not to damage the floor covering
We are preparing to install bolts designed to fix the tank to the toilet bowl. We turn off the plastic washers from them
In the technological holes available in the bottom of the tank, put the bolts
We install the tank on the toilet by threading the bolts into the holes located on the shelf of the toilet. Screw the plastic washers onto the bolts
We connect the toilet tank to the branch of cold water supply through a tee. Stop valves must be installed on the pipe in case of shutdown for repair or replacement.
We check the quality of the plumbing connection to the communications by pouring a bucket of water into the tank. Leaks should not be when filling the tank or when flushing
Step 5; Installing a toilet bowl on an insulating substrate
Step 6: Fixing the toilet seat with screws
Step 7: Cut off excess insulation material
Step 8: Preparing Tank Bolts
Step 9: Installing fasteners in the toilet bowl
Step 10: Attaching the tank to the toilet
Step 11: Tee to connect the tank to the water supply
Step 12: Testing Installed Plumbing
Detailed fastener instructions
To properly fix the toilet on the dowels to the floor, first markup and mark the future location, outlining the bottom of the compact with a marker or pencil along the contour.
Having chosen a suitable place, the toilet should be put on it and gently sway. A clear position suggests that you can proceed with installation. If the compact sways slightly, perhaps the problem is not in the floor surface, but in the irregularities at the edges of the plumbing. Normal sandpaper, which will need to “walk” through roughnesses, will help to quickly eliminate them.
Then make marks of the location of the centers of the holes for dowels and carefully drill them with a drill. Drills are used depending on the flooring. For tiles, a ceramic drill is used, and for parquet or laminate flooring, a drill for wood is used. When a hole in the tile or wood is made, the drill is changed to a construction punch.
A drill is placed on the tool for working on concrete. To ensure that the fastener clearly sits in size and does not hang, a mark is made on the drill with tape and a hole is drilled that perfectly matches the length of the part.
Then insert the dowels and the toilet itself, and then combine the holes in the base of the plumbing fixture with those drilled in the floor.
After the drilling procedure, it will be dusty and dirty around the hole. All debris will need to be cleaned and the surface of the tile degreased by wiping with a cloth dampened with ammonia
The pipe coming out from under the toilet bowl using the corrugation is connected to the sewer. Through the holes available in the lower supporting part of the toilet bowl, the connecting bolts are inserted into the dowels together with plastic gaskets or rubber washers.
In the process, they act very carefully so as not to overtighten the screws and not damage the integrity of the toilet.
They clearly screw the plumbing to the floor and close the fastening caps with decorative overlays made of polymer. The connection of the corrugation to the sewer is treated with a sealant or some other means with similar parameters.
Before you finally fix the toilet and tighten the bolts, you need to check how the drain works, and if everything is normal and no leaks are found, finish the job
At the finish, they carefully examine the area of contact between the base of the equipment and the floor and make cosmetic masking of cracks, if any. Then the whole structure will not only hold firmly, but also look aesthetically pleasing in the interior.
Also on our website there is an article with step-by-step instructions on how to fix the toilet on the tile, we recommend reading it.
How to make a side mount?
The side mount option is similar to the dowel method. The only difference is that all the connecting elements are inside the foot of the base of the toilet. Before installation, they also make markings, and only then they put the plumbing module on top.
Fixing is done through the side holes. For hidden lateral fastening, sets of connecting elements are used, consisting of corners and long screws
The work is painstaking and requires additional time. But in the end, the design looks much more aesthetic and attractive.
Mounting with adhesive
Putting a compact on glue is a very simple way of fixing equipment to the floor, but it takes a considerable amount of time to implement an event. The adhesive mixture should solidify qualitatively, and this usually takes 12 hours or more.
Fixing the toilet with an adhesive is extremely simple:
Image Gallery
Photo from
Step 1: Fitting the toilet to the installation site
Step 2: applying sealant to the bottom of the toilet
Step 3: Attaching the Toilet Leg to the Floor
Step 4: Remove Excess Sealant
If you start using the plumbing module earlier, the base will quickly become loose and will not withstand even six months of full operation.
This installation method is absolutely safe. In the process, there is absolutely no risk of damaging the plumbing itself or tile. After installation, the bathroom does not leave dust and dirt, so large-scale subsequent cleaning of the room is not needed.
Installation of the toilet on the sealant can be done at any time convenient for you. The work is not accompanied by noisy actions and will not interfere with any of the neighbors, even if the equipment is replaced in an apartment building
The contractor does not need to have any professional skills or extensive experience in carrying out repair activities. Everything is limited by the ability to use a glue gun and the tendency to accurately and pedantly perform tasks.
Initially, markup is carried out and the future placement of the compact is determined. It should be located comfortably for use, be accessible to sewer communications and connect to the water tank without any problems. When all conditions are met, the base of the sole is outlined with a marker or pencil.
Before fixing the toilet to the floor with the adhesive mixture, both surfaces to be joined are thoroughly cleaned, while simultaneously cleaning around possible debris and dust.
If the installation is carried out on a slippery, smooth tile, then to start the tile is treated with a drill with a nozzle in the form of a metal brush. It will partially remove the varnish from above and make the tile a little rougher, which will significantly improve its future adhesion to the glue.
When treating the surface with a metal brush, you need to be careful not to accidentally touch a part of the tile that does not go under the bottom of the toilet, but remains visible. To avoid accidental damage, it is worth taking a small nozzle, and activate a low speed mode at the drill
Then the surface is treated with a rag soaked in a solvent, acetone or ammonia.
After this procedure, no fat will remain on the surface, and its adhesive qualities will become an order of magnitude higher. Then the place is wiped dry with microfiber.
To improve traction, the edge of the sole of the supporting part of the compact needs to be treated with sandpaper. This will ensure a clear, even and reliable position of the plumbing device after installation.
Glue paste or silicone sealant, previously purchased in a hardware store, is carefully applied to the base of the toilet bowl.
Then the plumbing is transferred to the place of future deployment and installed in the place previously marked with a marker. The area around the bottom of the toilet is sprayed from the spray bottle with a soap solution.
When buying a sealant, you need to pay close attention to the shelf life of the product. If it is nearing the end or has already come out, the glue has lost a number of its properties and will not be able to provide reliable fastening and a clear position of the compact on the floor
Such processing is required so that in the process of subsequent finishing correction, excess sealant is easily cut off and does not stick to the tiled floor.
The silicone spatula is moistened with soapy water and the adhesive that protrudes from the bottom of the toilet bowl is removed. Do this immediately after installation, when the mass has not yet had time to freeze.
After all the above manipulations, the plumbing is left for 12-24 hours, so that the composition (sealant, silicone glue, epoxy or other) is stable and completely dried. During this period, they do not use the toilet and do not even touch it.Compliance with this point is extremely important and ensures the subsequent reliable and comfortable operation.
A day later, when the glue tightly clings to the floor, the toilet is connected to the sewer system, cold water is supplied and the seat with a cover is mounted.
Cement toilet
Mounting a plumbing module on cement is a more obsolete method of fastening, which is now chosen much less often. In terms of the main points, it resembles the above installation option for glue, but instead of modern mixtures and sealants, self-prepared cement mortar is used here.
A toilet attached to the floor with cement looks less aesthetically pleasing. If you suddenly need to replace it, you will have to break not only the mounting area, but also the adjacent coating
To make the bathroom look more attractive in the future, make a small recess in the place determined for installation, carefully clean it from debris and dust, fill it with prepared solution to the edges, and place the toilet bowl on top, soaking the edges of the sole with water.
Excess cement is carefully removed with a spatula and left to harden for 24 hours. At the end of time, they are connected to a drain sewer and water is supplied to fill the tank.
How to fix the toilet on taffeta?
Most often, this method is used for mounting compacts on a wooden floor. Taffeta - a laying made of high-strength wood with a thickness of 28 to 32 millimeters - is cut to the size of the support column of the plumbing device.
When installing plumbing on a wooden substrate, it is imperative to cover it with drying oil or waterproof varnish, thus protecting it from high humidity, natural for the bathroom, and potentially rotting
From the bottom, anchors are attached to the part or ordinary nails are driven in staggered so that they protrude 2.5-3 centimeters from the base. A recess previously made in the floor is poured with a cement mortar. Top with anchors down put taffeta. As a result, it should be flush with the general surface of the floor.
After 12-15 hours, when the solution dries and hardens, the toilet bowl is screwed to the resulting wooden base. Rubber or silicone gaskets are certainly placed under the heads to ensure that the structure is more reliable and does not lose stability during operation.
So that if necessary it is easy to complete all the necessary repair work and easily unscrew the screws, it is recommended to lubricate them with graphite or grease first
According to plumbers, a wooden part may well be replaced by a rubber one. It is cut out from high-density material (average thickness 5-15 mm). So that the edges of the rubber do not stick out, it is cut out slightly less than the size of the base base of the bottom of the toilet bowl.
The photo gallery will familiarize you with the steps of installing a toilet on a taffeta:
Image Gallery
Photo from
Step 1: Removing an Old Toilet
Step 2: Attaching the wood backing to the base
Step 3: Attaching the toilet to the taffeta
Step 4: Connect the toilet to the sewer
The most common mistakes in work
When carrying out plumbing work, it is necessary to observe clarity and sequence of actions. This will ensure in the future the absence of leaks, unpleasant odors and other negative aspects in the bathroom.
When fastening a compact toilet to the floor, it is very important to carefully level the surface on which the plumbing fixture is placed.
To level the surface, it is best to use the construction level. This tool allows you to make all the necessary measurements with maximum accuracy and without undue effort.
Ignoring this item happens quite often and leads to a violation of the integrity of the system, the appearance of leaks and subsequent failure of the equipment.
Another crucial point is the absolute tightness of all butt joints and the rigid installation of fasteners. It is especially important to pay attention to the area where the corrugation is connected to the toilet outlet.
In the future, sewage liquid may be released through a poorly finished edge, which will cause the appearance of sharp, unpleasant odors in the bathroom.
When connecting the toilet to an old cast-iron riser, to avoid leaks and unpleasant odors, the inlet of the pipe is very carefully washed, cleaned to metal and dried. Sealant is applied to an absolutely clean surface, the corrugation is firmly inserted and gently pressed so that it clearly takes its place
To guarantee, it is possible to apply sealant not only on the inner surface of the pipe, but also to make an additional outer layer, thinner on top and thickened at the bottom. Neither liquids nor odors penetrate such a barrier.
When attaching the toilet to the floor on the dowels, you need to act carefully and without rush. If you overdo it and fasten the plumbing too tightly, it can crack during operation.
Very weak fasteners are also not an option, since the compact will begin to swing, and water will ooze from under the base. It is advisable to observe the “golden mean” here and create an optimally reliable, stable mount.
A careful attitude to the process and taking into account all of the above points will help to attach the toilet to the floor accurately and clearly, avoiding in the future the need to redo everything or make adjustments to the work.
The video tells in detail how to quickly, easily and without using expensive electric tools securely and firmly fix the toilet on the tiled floor:
The video describes the method of mounting the toilet on silicone sealant and describes some interesting nuances of installing plumbing equipment on the "warm floor" system:
Features of fixing to the floor and installing a toilet with a lower connection - useful tips, tricks and tips from an experienced master:
Only the owner of the real estate in which the installation or replacement of equipment is carried out can decide on the method of fixing the toilet to the floor of the bathroom. You will have to choose based on the finish coating of the bathroom floor, the model of the toilet itself and the overall design of the room.
Attentiveness, accuracy, scrupulousness and the above helpful tips will help to do everything right, quickly and no worse than what would happen to professionals.
Have questions about the topic of the article? Or maybe there is experience in self-fixing the toilet to the floor, and you can give practical advice to a beginner home master? Please leave your comments, share experiences, ask questions in the block located under the article.