Many motorists are kind to cars, so they are ready to invest time and energy in the improvement of their garages. Often, the room performs not only its direct functions: it is used as a workshop, pantry and even a place to relax in a male company.
If you equip the economical heating of the garage with your own hands, it will be comfortable to stay there for many hours. Let's try to figure out how to properly equip the garage heating and what you need to pay attention to in order not to go broke paying bills.
Advantages and disadvantages of various systems
The garage heating system should be cheap, and this is the main requirement. The owner of the garage has to invest a lot of money in the maintenance and repair of the car, the arrangement of premises for him. It is costly, and it is worth using any opportunity to reduce the cost of heating.
On the other hand, the savings should be reasonable: not at the expense of the efficiency or safety of the system.
Image Gallery
Photo from
If the garage is adjacent to the house, it will be least expensive to connect it to a common heating system. It is enough to install one radiator, and its power will be enough so that the room temperature does not fall below 5 degrees
Infrared heating has its advantages. Some garage owners choose this option, despite the high cost of the appliances themselves and electricity. The main plus is extremely rational energy consumption
Gas heating is best suited for non-residential premises not connected to centralized systems. You can choose this option if there is electricity in the garage, but the wiring is not designed for the additional load in the form of a powerful heating device or you need to save on electricity
Heat guns on diesel fuel or diesel fuel are excellent for heating garages, car repair shops, etc. If you can buy low-cost liquid fuel, this is a good solution. You can also save on the device itself by assembling it yourself
Water heating in the garage
Ceiling infrared heater
Gas heat gun in the garage
Diesel fuel heat guns
There are many different types of systems and devices that can be used to heat the garage. They are not perfect, they have their own shortcomings. Each owner has to decide which selection criteria are most important for him.
Option number 1 - classic water heating
To connect heating to the garage, it is not necessary to install a separate boiler, however, an additional load falls on the general system. This must be taken into account when buying heating appliances and taking them with a power reserve.
Fuel consumption is also increasing, but the cost is still lower compared with the arrangement of a separate heating system for the garage.
The cheapest thing is to heat the garage, which is adjacent to the house or located nearby (no further than 15-20 m). As a rule, the area of the room is small, and for its heating one radiator is enough for 6-20 sections (depending on the size and layout of the building)
The second option is to equip the garage heating system with a separate boiler. This is a good solution if the building is far from home and the heat loss when moving heated water through pipelines is too large.
When arranging a water system with a separate boiler, it is worth using antifreeze as a coolant to prevent possible defrosting.
In the garage you can install a separate boiler. It can be any: solid or liquid fuel, gas or electric. It depends on which energy source the owner of the room prefers.
The heat carrier is heated in the boiler and piped to the radiators. Cooling down, he again returns to the heater. The system can be single or double pipe. It depends on whether the radiators are connected to the boiler in parallel or in series.
The first type of connection guarantees the same heating of all radiators, however, it requires two pipelines.
For a garage, a one-pipe system is best. Such a scheme allows you to equip heating with minimal material costs, and installation is also simplified. If there are several radiators, they are connected in series.
It is worth considering: in each subsequent device, the coolant temperature decreases.
Many owners assemble their own boilers or stoves for their garages, connect old radiators, and expansion tanks are made of plastic containers. This allows you to achieve the ideal temperature in the room with minimal cost.
Spacious garages, commercial car repair shops, service stations are equipped with a full-fledged double-circuit heating system. You have to spend money on more materials and complex installation, but the heating of the room will be uniform and efficient.
Option number 2 - heating with gas
Gas heating is the cheapest, however, to connect to the highway, you will have to apply for permission from the relevant services. In many cases, garage owners try to avoid a long approval process.
Devices rationally consume fuel and warm objects, not directly air. Advantages of infrared heaters: instant creation of a local comfort zone, soft heat, high efficiency
Another nuance: for unauthorized connection to the main pipeline or commissioning, you can pay a serious fine.
Therefore, it is advisable to do everything according to the rules or to use balloon gas mixtures.
One of the main advantages of the convector is a very quick heating of the air. This is important if the owner does not constantly heat the garage, but only during the time that he spends there
If you connect to the highway, you can provide cheap and highly efficient heating. If you have to use liquefied gas, then you should choose a device that economically consumes fuel. It can be a gas heat gun, infrared heater or convector.
Option number 3 - electric heating
Electrical appliances are considered the safest. They are convenient to operate, compact, efficient and capable of instantly warming the room. Any customer will find a model of the right capacity and with the necessary technical parameters.
The design of the devices has much in common with the installation of fan heaters: the fan delivers cold air to the heater, and then it throws it into the room with force
The only drawback of electricity is its high cost, and this immediately crosses out all the advantages. Such electrical appliances should be chosen only for rooms where the owner spends a little time. For permanent garage heating, electric heaters are disadvantageous.
A rational solution is the purchase of a mobile infrared heater, convector, fan heater or heat gun. They are easy to carry, rearrange from place to place. The most powerful and practical devices are heat guns.
Modern electric convectors are devices with high efficiency. They are lightweight, comfortable, economical and take up minimal space. Their main advantage is absolute safety.
An unsuccessful option is an oil heater. The device has its advantages, but is more suitable for long-term heating. In addition, it spends a lot of energy, slowly warms up the air.
However, there are exceptions. So, a home-made heater, assembled from an old cast-iron radiator and a heater, will cost literally a penny. The power of the heating element is chosen by the owner himself, and used oil can be used as a heat carrier.
The device of such a heater practically does not differ from the design of industrial models. If there is a used cast-iron radiator, heater and wire, the whole process of self-assembly will take several hours
If you add metal legs and attach a dryer to a makeshift heater, you get a convenient multifunctional device. How to do it is described in the master class, which can be found in our selection of video materials.
Option number 4 - solid fuel devices
Solid fuel boilers, stoves are very profitable due to the cheapness of coal and firewood. The disadvantages include the need to build a chimney, which leads to some increase in the cost of the system.
These costs are paid off due to the long service life, efficiency of the stoves, low cost of fuel (you can use waste: sawdust, wood trimmings, any combustible materials).
Image Gallery
Photo from
The good old potbelly stove is ideal for a garage. When installing it, you must adhere to the norms and rules of fire safety. A sheet of asbestos, metal or any other material is placed under the heater. Also, make sure that there are no flammable objects in the garage
Long-burning furnaces are economical and efficient heating appliances. Such a furnace is universal: it is suitable for both permanent and temporary heating. One small portion of firewood is enough for the furnace to warm for several hours
The design of the furnace provides two fuel chambers. Thanks to this device, the efficiency of the device can reach 86%, which is very good for a solid fuel stove. The heating rate is high: it warms up in the room immediately after igniting the firebox
The unique pyrolysis stove “Bubafonya” was invented by the Russian Athanasius Bubyakin. It is easy to make such a furnace yourself from a gas cylinder. Access of air is regulated by means of a movable metal pin. Additional heat is removed from the chimney thanks to a water jacket
This is a successful modification of the popular Buleryan furnace. It is not only effective, but also looks stylish. This option will appeal to those who like to gather as a friendly company for purely male gatherings in the garage. The hob is provided in the design, and the case does not overheat, which eliminates burns
Models of the Termofor trademark are various. You can easily find a furnace of suitable design and any capacity. The main feature is special convection pipes, due to which the furnaces are highly efficient. Models can work in two modes - pyrolysis and conventional fuel combustion
The main advantage of Breneran furnaces is their reasonable cost. The device practically does not differ from the Buleryana design, and the lower price is due to the fact that the devices are of domestic production, not imported
Solid fuel furnaces equipped with convectors quickly warm the air, so they are often installed in garages and workshops. Especially popular is the "Convection of Varna". This furnace is equipped with a special convection hood around the entire perimeter of the housing, so it quickly begins to give off heat
Potbelly stove in the utility room
Homemade long burning stove
Buleryan is a good option for a garage
Homemade stove "bubafonya"
Breneran is a domestic analogue of Buleryan
Garage oven with convector
A solid fuel furnace is cheap, does not require connection to a centralized communication network, and obtaining installation permission. However, it is worth mentioning the disadvantages: increased fire hazard, the need for constant monitoring of combustion, the smell of smoke in the room, the release of harmful substances into the air.
Option No. 5 - liquid fuel furnaces and boilers
Heating appliances operating on diesel fuel, diesel fuel, and mining are popular. They do not have to be bought at the store. It is quite possible to assemble a do-it-yourself boiler, a garage oven, and even a heat gun. Cases of such devices are made of gas cylinders, old barrels, heat-resistant steel sheets.
The efficiency of such a compact stove reaches 97%. She works on diesel fuel and consumes a minimum of resources. To heat the room for 1 hour, 0.3 l of diesel fuel is enough
Home-made stoves are not as economical as industrial production models, but they also allow good savings on heating. The fuel consumption of a homemade miracle oven or a heat gun made by yourself is approximately 0.5-0.7 l / h, depending on the power.
What type of heating is most beneficial?
It all depends on the specific operating conditions and preferences of the garage owner. The cheapest system is a single-tube water system powered by a gas boiler.
It will have to invest considerable funds in its arrangement, but it is so economical that the costs will pay off for 1-2 heating seasons. However, this solution is far from suitable for everyone.
Gas and diesel appliances equipped with temperature sensors and automation cannot be considered completely non-volatile. Their work requires electricity, but not more than the bulb consumes
You can economically heat the garage with gas cylinders or solid fuel. These options are not suitable if there is no way to control the operation of the devices, but for heating, while the owner is in the garage, they are good.
How to reduce heat loss and not go broke?
No heating system will be profitable and effective if you do not take care of reducing heat loss. Heaters will be wasting a huge amount of energy. It is expensive and impractical, so you have to insulate the gates, walls, floor and roof.
You can use expanded clay, polystyrene concrete, foil insulation, but the cheapest and most universal option is polystyrene. It is suitable for insulation of all structural elements.
It can also be used for thermal insulation of the floor, provided that a floating screed is made: the foam does not tolerate mechanical stresses, so it is poured with cement.
Styrofoam is ideal for cladding garage doors. The insulation is mounted on a special crate, and the top is covered with the outer lining - MDF, chipboard or plywood
Polyfoam sheathe the ceiling, walls and gates of the garage. Two options are possible - external or external wall decoration. Both are equally effective and can achieve excellent thermal insulation of the building. You should choose based on the convenience of the owner of the garage.
We offer a selection of videos that will help you better understand the issues of heating and warming the garage.
Assembly instruction for a super-economical water heating system:
A mini-overview of an economical gas stove spending 0.5 l of gas per hour:
Tips for self-assembly of an oil heater from a used cast-iron radiator:
Video instruction on the rational organization of heating in the garage:
Recommendations for reducing heat loss in the garage:
The issue of heating the garage is not difficult to solve. It is enough to deal with the main advantages of each heating system and with possible limitations in its use. You should choose, focusing on your own needs.
The main thing is not to forget about the rules of fire safety. No savings are worth putting your car and your own health at risk.
Perhaps you have personal experience in arranging heating for a garage? Please share your opinion with our readers, tell us which heating system you prefer and why. Leave your comments, ask questions in the block below.