Today it is difficult to imagine a family that does not have a washing machine. It has long ceased to be a luxury item, and in families where there are small children, this assistant just can not do. Do you agree? But, like any household appliances, the washing machine can break.
The most common cause of damage is scale on its parts. It can reduce consumer characteristics and even disable your assistant.
To prevent problems, it doesn’t hurt to know how to clean the washing machine with citric acid (LK). This method is absolutely safe for technology, but only subject to certain rules.
In this material you will find expert advice that will help to properly clean the washing machine from scale without resorting to the services of specialists. We will talk about how often you need to carry out preventive cleaning with citric acid. In addition, the article contains videos that clearly demonstrate the process of caring for the equipment.
Scale and chemistry for its removal
The basis of scale in household washing machines (SM) is insoluble carbonates of magnesium and calcium (CaCO3 and MgCO3)settling on the details. They determine the water hardness level, and their concentration affects not only the scale formation process, but also the chemical effectiveness of the detergent.
In accessible places, salt deposits can be torn off mechanically, but getting to scale on a heating heater is quite problematic.
Therefore, to remove it in hard-to-reach places, a chemical method using citric acid is used. She dissolves CaCO3 and MgCO3, and does not corrode metal surfaces.
Citric acid is an affordable, always commercially available product that effectively dissolves persistent mineral deposits.
The chemical reaction is as follows:
2C6N8ABOUT7 + 3СаСО3 = Ca3(FROM6N5ABOUT7)2 + 3CO2 + 3H2ABOUT.
During the reaction, calcium citrate is formed in the SM (Ca3(FROM6H5O7)2), which dissolves well in water and is removed with it when draining. It is safe for humans and is even available in tablets to replenish calcium reserves in the body.
Theoretically, to clean a washing machine from 100 grams of scale, 125 grams of citric acid would be required. This chemical fact must be remembered when evaluating the effectiveness of the cleaning performed.
Purity of citric acid is important only in cooking, the main thing for descaling is cheapness and correctly calculated amount
Causes and consequences of scale formation
The scale formed in the washer is a fait accompli that requires a response. But you can not ignore the reasons for its appearance, which can repeat the process of salt deposition on the details.
Frequent washing at 95 ° C reduces the life of the washing machine. The mode with 30-40 ° C in combination with a good powder is also able to remove all dirt from things
Scale formation is promoted by:
- carbonates, cations of calcium, magnesium dissolved in water;
- high washing temperature (over 60 ° C);
- the use of phosphate-free powders.
The effect of high temperatures lies in the fact that with strong heating on the metal surface of the heating elements steam bubbles begin to form - the result of local boiling of water.
At the micro level, this leads to its separation into a pure fraction H2O, passing into the surrounding liquid, and insoluble carbonates deposited on the metal. The higher the washing temperature, the more limescale is bound in one cycle.
Besfosfatny powders favorably affect ecosystems of reservoirs into which the sewerage merges, but they bring only problems to people.
Phosphates reduce the overall hardness of water and inhibit the formation of insoluble carbonates, so they are used in special products for the internal cleaning of washing machines.
Try to try the temperature of the glass door SM in the washing mode, as its coldness indicates a breakdown of the heater
The absence of phosphates in washing powders leads to an acceleration of salt deposition on the SM parts.
The formation of scale is fraught with the following consequences:
- Overheating of the heating element due to poor heat transfer to the surrounding water through scale.
- A layer of salts isolates metal and rubber parts from air, which helps to retain moisture in them, the appearance of mold, rust and reduce strength.
In general, there is little good from scale, so you should remove it with citric acid or a specialized anti-scale agent for washing. The features of this method should know the maximum information.
Mineral sediment on a pulley, crosspiece, bearing, and other parts located nearby moving and in contact with each other increases the load on the engine, as a result, contributes to accelerated wear
Pros and Cons of Citric Acid Cleansing
The properties of citric acid are due to its chemical structure. This substance was not invented specifically for cleaning washing machines, so its effect on the details of the technique has both positive and negative sides.
The positive aspects of the method
Without cleaning the scale in the SM, one can expect at least burnout and the need to replace the heater. Therefore, you should not delay the cleaning procedure. The method of removing deposits should allow each person without experience to carry out the procedure.
When deciding to regularly clean SM with citric acid, you can immediately buy a large amount of it. So it will be cheaper and less troublesome
The use of citric acid to eliminate accumulated insoluble salts meets this requirement due to several advantages:
- Availability and low cost. The right amount of citric acid can be bought at any store for several tens of rubles.
- Simplicity. Even an unprepared person can carry out the cleaning procedure.
- Efficiency. 100 g of citric acid will dissolve up to 80 g of scale.
- Safety. Both citric acid and calcium citrate formed after dissolving scale are harmless to health.
These positive aspects of LC make it the drug of choice in the fight against scale. It makes no sense to buy expensive special means for cleaning SM, if they provide a similar effect.
Citric acid is used both in the care of the internal and external parts of the washing machine. The advantage of a folk remedy is that using lemongrass can effectively clean surfaces inaccessible to the user
Confirmation of the effectiveness of removal of the accumulation of citric acid is demonstrated in the video:
The negative effects of citric acid
There are legends about the negative effects of citric acid on internal parts when cleaning the washing machine. Numerous arguments are presented against this method, but few provide evidence.
The theoretical claims of people to clean SM with citric acid are:
- The formation of salts that remain in the washing machine and can clog the drain.
- Acid corrodes the metal components of the heater.
- Rubber seals soften and may crack.
- After cleaning things have a specific smell.
A 1% citric acid solution is used to remove scale in the SM.
For comparison, a 10% solution of aggressive hydrochloric acid is used to clean water boilers from deposits. And even multiple processing with such a powerful tool does not affect the operation of the equipment. And rubber is generally resistant to short-term exposure to weak acids.
A problem will arise if crystals or a solution of citric acid remain in the pocket of the rubber cuff that seals the door. In other cases, the negative effect of citric acid on the inside of the washing machine is a myth.
Holes in the cuff of citric acid do not occur immediately, but only after multiple descaling sessions without observing basic rules
The salts formed during cleaning of the scum, together with the residues of LA, are completely removed by the next two or three rinses, leaving no smell or sediment.
Are all the cons of citric acid turned out to be far-fetched? No, descaling has another drawback, but it is common to all cleaning products.
Insoluble salts can accumulate in places where water leaks, temporarily tightening the hole and removing the problem. After cleaning the washing machine, the leak may appear again. The described problem is not initiated by citric acid or other means, but the possibility of its occurrence should be remembered.
Instructions for cleaning the machine "lemon"
Citric acid cleans not only the internal parts of the CM, but also the box for falling asleep powder, the door and its rubber gasket.
To do this, you will need:
- 100 g of citric acid;
- water absorbent rag.
The following step-by-step instructions for cleaning the washing machine with citric acid are guaranteed to help get rid of internal deposits of salts, without harming the details of the equipment.
Simplified, the principle of cleaning the inside of the washing machine with citric acid is to conduct a normal washing session with loading folk remedies in a cuvette for detergent compositions or in a drum
Step # 1: preparing for cleaning
You should first check the drum again and remove things from it, if any. Then measure out 100 g of citric acid for the washing machine with a load of 6 kg. If the technique involves a different maximum amount of laundry, then the amount of reagent should be adjusted in the appropriate direction.
You can use a lemon in 2 types:
- crystalline;
- diluted in water.
Dissolved acid is preferred because crystals are guaranteed to not get stuck anywhere. 100 grams of lemons are bred in half a liter of warm water. LK in dissolved form is not suitable for cleaning washing machines, which at the beginning of work pump out the remaining water under the drum.
Step # 2: loading acid and turning on the washing machine
Crystalline powder is loaded into the receiver for washing powder, and the dissolved lemon can immediately be poured onto the drum before closing the door.
The maximum long-term washing mode with a water temperature of 90-95 ° C is selected and turned on. It should have a minimum of 3 rinses.
Step # 3: Removing Crystalline Acid Residues
After the final set of water in the machine, open the compartment for loading the powder and rub the remaining lemon along its walls. If it is not there, then you can borrow a little reagent in the kitchen.
After 30-60 minutes, it is necessary to wipe the compartment with a damp cloth, removing the plaque there. The main thing is to have time to remove the acid before starting the rinse regimen.
Step # 4: inspecting the washing machine
After washing, open the door and allow the interior to dry. Separately, you need to wipe the accumulated water in the pocket of the rubber cuff.
Additionally, you can remove the bottom panel of the machine and clean the drain filter, in which breakaway particles of limescale can get stuck.
Image Gallery
Photo from
Step 1. Checking the drum and unloading things
Step # 2. Setting the mode with a temperature of 95 ° C
Step # 3. Powder Compartment Cleaning
Step # 4. Cleaning the drain filter from debris
The door SM and the rubber seal must be wiped with a cloth soaked in 1% citric acid solution. The remaining plaque on them should be easily removed. This completes the descaling process. It is important to wipe the rubber seal well so that you do not have to replace the sealing sleeve.
Product Care Tips
Professionals recommend regularly using special equipment to prevent the appearance of scale. This advice can be ignored if you clean the washing machine with a lemon every 4-6 months.
The frequency of the procedure depends on the hardness of the water in the region and the average temperature of the wash. The higher they are, the more often it is necessary to clean the equipment.
Inside the machine, citric acid is in contact only with the heater and the working space of metal, plastic and rubber. She and her couples do not get on the engine, the electronic board and other critical elements of technology, so you should not be afraid of the regular use of LC.
Although the process of cleaning SM with citric acid is quite simple, it’s better to prevent the formation of scale than to remove it later.
Prolonged washing of the laundry in the drum can cause mold and bad smell in the washing machine.
The suggested tips will help reduce the deposits of insoluble salts on the internal parts of the machine and reduce the likelihood of its breakdown:
- After washing, keep the drum open until it dries completely.
- Buy powders containing water softening components.
- Pour detergent in the recommended volume for hard water.
- Do not machine shabby, decaying clothes.
- When washing, it is preferable to use modes with a maximum temperature of 40-50 ° C.
- Pull linen from the SM immediately after washing.
When descaling, do not exceed the established concentration of citric acid. This will not enhance the effect, but only lead to extra cash costs.
And we must not forget about the mandatory wiping of the sealing rubber cuff to dryness after the cleaning procedure.
After watching videos about the practice of using LC for cleaning a washing machine, you can see the effectiveness of this method.
Cleaning the washing machine from start to finish:
Analysis of the effectiveness of using limes to descale proves that this tool copes with the task perfectly. The main thing when cleaning the washing machine is not to get involved in amateur performances and carefully follow the specified rules and recommendations for the procedure.
And what method do you use to clean the washing machine? Please tell us about your experience with scaling. Ask questions on the topic, participate in discussions and suggest effective methods and means for descaling - the contact form is below.