The correct operation of the dishwasher depends not only on the quality of spare parts and assembly. The uninterrupted functioning and normal execution of the main tasks by the unit are affected by the correct connection of the dishwasher to the utilities. Do you want to do this work yourself, but doubt that everything will work out?
We will help you in the implementation of your plan. The article describes in detail the steps of installing the equipment, connecting the outlet, water supply and arranging the drainage system. In order not to encounter an accident, leakage or fast repair, you must adhere to the manufacturer's recommendations indicated in the instructions.
Selecting a location based on the installation method
The sooner you think about acquiring appliances, the less trouble there will be with further improvement of the kitchen.
The ideal option is a comprehensive repair, including:
- designing a project;
- laying of water supply and sewage pipes;
- conducting separate power lines for powerful units;
- decoration of the room;
- installation of furniture and appliances.
In this case, the risks that there is not enough niche for the dishwasher or its dimensions do not fit are reduced to zero. Walls with connected connectors look neat, safety requirements are met.
The modern kitchen is a room filled with a large number of large and small household appliances. Designing helps to correctly position both the devices themselves and the connection points - sockets
The installation location depends on the type of machine, respectively, on how it is installed.
All devices are usually divided into two categories:
- freestandingportable, representing a mobile unit;
- recessedstationary, for the installation of which a cabinet is required.
For proper installation, the size of the dishwasher is also of great importance. Allocate a subcategory of compact machines, with reduced dimensions.
Among them there are both freestanding appliances designed for installation on a countertop or in a cabinet niche, as well as built-in ones.
Options for the location of dishwashers:
Image Gallery
Photo from
The proximity of communications facilitates the process of water supply and drainage. Cleaning dishes before loading into trays near the sink is also much more convenient
If the working area is partially transferred to the “island”, which is an autonomous module block in the center of the kitchen, then the dishwasher can also be built into it
The complexity of the installation lies in the location of furniture remote from communications. For the machine to work, an extension of pipes or hoses of more than 1.5 m is required
The model, which is not intended for embedding, can be put on any free place, but with one condition - the supply of water, sewage and electricity as close as possible
Compact PMMs are called desktop ones. Most often they are installed directly on the countertop, near the sink or work surface - a cutting table
Among the small-sized models, there are built-in dishwashers that can be placed both under the countertop and above, in a “pencil case” or cabinet at a height of 90-120 cm
In order not to occupy a useful surface on the working kitchen table, the dishwasher can be placed in one of the empty niches in the cabinet, like a microwave
If the dimensions of the compact machine allow, it can be put in a cabinet that hides the communications of the sink. This method facilitates the connection of the device, but it is not very convenient to use it.
Built-in type dishwasher installed next to the sink
The machine is integrated in the "island" in the center of the room
The dishwasher is installed in a freestanding kitchen cabinet
Freely positioned freestanding model
Compact model mounted on top of countertops
The compact PMM model is built into furniture
Bench mounted dishwasher / shelf
Mini dishwasher installed under the sink
You need to think about how and where to install the dishwasher in advance. Mostly, the unit should be correctly positioned relative to the communications - as close as possible to the pipes.
We also recommend that you install cabinets for dishes and other utensils that are designed for washing in the PMM in the accessibility zone.
The cleaning process will be much faster if cleaning plates from large pieces, loading dishes into the dishwasher trays, putting clean dishes on the shelves will happen from the same place.
The importance of using instructions
Manufacturers are responsible for the quality of their products, so new dishwashers have a guarantee - from 12 months to 5 years. It is more often possible to return a faulty Chinese unit to the service within 1 year, European - 2 years.
However, improper installation of the machine, contrary to the requirements of the manufacturer, deprives the buyer of the right to free repair or replacement of equipment.
Therefore, the main document and installation manual for the dishwasher becomes instruction. This is a booklet with a detailed description of the installation and connection of a new dishwasher to the water supply and sewerage.
Also, the instructions contain technical requirements that relate to the parameters of the connected electrical network, pressure in the pipes, etc. The characteristics of the machine also need to be taken into account.
In the instructions, the description of all actions is accompanied by understandable diagrams that show how to connect the hoses correctly, fix the machine in the cabinet, position it relative to the pipes (+)
So, fully integrated PMM with a large mass is placed on the floor, additionally fixing on the walls of the cabinet or countertop. But compact models can be integrated into a cabinet that can support their weight, even taking into account loaded containers and water.
If within six months some parts of the dishwasher fail due to improper location of the hoses or strong vibration of the case, they will have to be replaced at your own expense - the warranty is voided.
Connecting PMM to communications
In order for the machine to work, it is necessary to ensure the supply of electricity and cold water, as well as to equip the drain of used liquid into the sewer.
If a separate outlet for the PMM is installed during the repair, you can skip the first stage, however, the next two are performed during the connection process in any case.
Stage # 1 - installation of a separate outlet
An extension cord inserted into a common outlet, a filter or a tee is not recommended.
Such "intermediaries" may not withstand the load, fail, or even melt. Necessarily require a separate wiring product of the "Euro" standard, with grounding and a high degree of protection against moisture.
Blocks built into the wall or overhead sockets are installed in convenient places for use: above or below the countertop, but with easy access
Too close to the floor to fix the outlet block is not advised - during leakage, water can get into the product. The minimum distance from the flooring is 15-20 cm.
This is true for embedded models, when the outlet is placed on the wall behind the dishwasher. For freestanding units, the usual location is at a distance of 40-90 cm from the floor.
In addition to the outlet, a wire is required, preferably in non-combustible insulation and with a cross section designed for increased load. A suitable option is a copper 3-wire wire VVGNG 3 * 2.5.
The ends of the wires that are stripped of insulation are inserted into the terminals, screwed or secured with latches. A separate terminal is provided for the ground wire, which can be recognized by the yellow-green insulation film.
Installing an outlet with grounding refers to basic household skills, so many cope with its installation on their own. However, if skills are not enough, it is better to entrust all work on electrical equipment to a specialist.
From the outlet, the wire stretches to the electrical panel, where a separate circuit breaker is installed. It is recommended to provide similar machines for each powerful household appliance - if necessary, you will not have to disconnect the entire "kitchen" line.
A sample of a suitable circuit breaker for the line to the dishwasher. Rated current - 16A, BP / current char - ka, C, current limitation class - 3
Even if you theoretically know how to install a switch on a din rail, all the electrical work in the dashboard must be performed by a representative of the management company or other service organization.
After the installation is completed, it is necessary to check how the outlet works. To do this, turn on the machine and insert the plug of a simple device, for example, a table lamp, into a socket.
Stage # 2 - ensuring water supply
So that the machine can be used at any convenient time, the water supply hose should be connected to the pipe or flexible connection with a threaded connection using a tee or adapter.
The easiest way to make a tie-in is if the dishwasher is located next to the sink with a mixer. A flexible eyeliner is wound, a tee is installed instead
The length of the water supply hose is 1-1.5 m. It is at such a distance from the highway that manufacturers recommend installing a dishwasher so that it functions correctly.
Procedure:
- we turn off the flexible hose of the mixer from the pipe;
- we attach a tee with sizes ½ inch "mother" and "father" in a straight section, with a ¾-inch outlet on the side and a tap for shutting off water;
- for tightness of the connection we use fum tape or another sealant;
- ¾ inch nozzle output in a convenient direction for connecting the hose;
- we fasten the flexible eyeliner to the ½ inch branch and the dishwasher hose to the side outlet;
- test the water supply, if necessary, tighten the connection.
Depending on how far the machine is from the sink, this or that connection method is selected.
Image Gallery
Photo from
If instead of one dishwasher you need to connect several devices that need a cold main water supply, use a collector and a set of adapters
It happens that the machine is installed far from the sink, but close to the pipe with cold water. Then the tee with a shut-off valve is cut into the mains, and water flows directly into the dishwasher
In order not to cut a piece of pipe, use a repair clip. It is tightened with bolts in the tie-in section, then a hole is drilled on the side, the tap is mounted and the hose is screwed
The use of flexible hoses is not always advisable, therefore, if the machine is installed far from the highway, water supply is carried out, we increase the pipes
Collector applied for multiple connections
Correct insert in a plastic pipe
A tee is installed on the steel pipe
The extension of the plastic pipe for the dishwasher
All methods are functional and in their own way good, so the owners of the unit will have to decide how to connect a new dishwasher with their own hands based on specific conditions.
Connection parts are sold in plumbing stores, so there should be no problems with the purchase of tees, manifolds, seals. Try not to save on details and choose even more expensive, but high-quality components and gaskets.
Features of connecting compact devices
The instructions for mini-dishwashers indicate the installation method without stationary connection to communications. Before washing, the water supply hose is put on the spout of the mixer, and the drain hose is lowered into the sink.
The lack of a permanent connection is relevant only in one case - if the dishwasher often has to be moved to another place or transported to another house, for example, to a country house
Some use this method, but it is fraught with uncomfortable moments:
- every time you have to do extra actions;
- hoses are visible and spoil the overall look;
- due to frequent connection / disconnection, the connection points quickly become loose and wear out;
- strong water pressure can “knock out” the hose from the sink, as a result, a flood will occur;
- the wash remains busy while the dishes are washing and rinsing.
Therefore, for reliability, it is better to choose a specific installation location and ensure a constant tight connection.
About connecting to hot water
Buyers consider the possibility of connecting to both pipelines - with hot and cold water - as a useful option and are even ready to overpay for a “useful” addition.
However, there are many reasons why you should not "save" on heating the machine and use hot water:
- the composition of hot water is worse than cold;
- the electronic unit will “fly out” if the water temperature in the network is higher than the programmed one;
- when centralized, hot water is often turned off.
Savings themselves are also being called into question. Modern models are already considered quite economical, given the small consumption of electricity.
And with the use of hot water, some components may fail prematurely, and you will have to spend a significant amount on repairs.
Does your dishwasher suggest a double connection, you can find out by studying the instructions and connection diagrams. There are two water hoses on the back of the machine instead of one
The grossest mistake is to connect the hot line to a device designed exclusively for supplying cold water. Machine parts will not withstand heat and will break quickly.
Stage # 3 - drainage device
Drainage is a necessary condition for the proper operation of the dishwasher, for this a drain hose is provided.
There are two ways to connect it to the sewer line:
- directly into the pipe with a rubber sleeve;
- through a siphon located under the sink.
The second option is the most successful, since it immediately solves all problems: eliminates odors, protects against reverse fluid flow, creates the necessary pressure in the pipe, protects against leaks.
You will have to purchase a new siphon if the old one is not designed to connect household appliances, and consider the location of the drain hose.
Image Gallery
Photo from
Siphon with an additional branch pipe
Plastic insert for lifting
Required drain hose length
In order to simultaneously maintain the tightness of the joints and the normal, without vacuum, pressure in the line, using a direct connection (without a water seal), use an “anti-siphon” valve. This is an inexpensive plastic product that is inserted directly into the slot in the hose.
On this connection of communications can be considered completed. After the test run, it will become clear how correctly the hose connections are made and whether additional sealing is needed.
Nuances of installing embedded technology
Freestanding units are simply installed in the place provided for them, then they are connected. Built-in models need to be integrated into the furniture set.
Here are some useful suggestions that may come in handy during installation of embedded equipment:
- the dimensions of the cabinet for embedding should correspond to the dimensions of the dishwasher body, for comparison, you need to check with the schemes provided by the manufacturer;
- be sure to use the protective devices that are in the kit - a metal bar to strengthen the countertop, a vapor barrier film;
- tighten the legs to align the case, usually three - two are in front and one is in the back;
- do not forget to insert the side bushes and fix the case with self-tapping screws;
- Fix decorative panels strictly according to templates or stencils, which are also included in the delivery.
Dishwashers of different manufacturers may have structural differences, so you should rely only on the instructions of a particular model.
The document clearly sets out how to properly install the dishwasher, in what order do the installation and connection of communications.
The nuances of connecting hoses to pipes are disclosed in the following video:
Detailed instructions for hanging the facade:
The power supply for the dishwasher is discussed in the following plot:
At first glance, all the steps to install a dishwasher seem simple and do not require special skills. However, in the process of installation or connection, questions often arise, so relying on self-reliance alone is not necessary.
If there is no experience in such work, enlist the support of specialists. This will be especially needed where safety regulations are required..
Do you have personal experience installing and connecting a dishwasher? Want to share your knowledge or ask questions about the topic? Please leave comments and participate in discussions - the feedback form is located below.